Lt Ethanol - Ffv 3.6l Cd 4 Wheel Disc Brakes Abs Brakes Am/fm Radio Compass on 2040-cars

Auto blog

Fernando Alonso just misses qualifying for Indy 500 on first day

Former Formula One world champion Fernando Alonso will need a clutch run on Sunday to qualify for the Indianapolis 500 on May 26 after he failed to seal a guaranteed spot on Saturday. The Spaniard tried fives times to put his McLaren Racing Chevrolet in the top 30, but wound up one spot short. He can make the 33-car field only through a six-car shootout on Sunday that will determine the race's final three drivers. "We have another chance to be in the race," Alonso, who is seeking to make his second Indy 500 field, told IndyCar TV. The Spaniard twice got inside the top 30 but both times was bumped outside the mark, with JR Hildebrand and Graham Rahal the final two drivers to seal qualifying spots. Britain's Pippa Mann will be the only woman in the race, qualifying 30th in 227.244 mph. Race positions 10-30 were determined during the day-long qualifying with Saturday's nine fastest drivers set to return on Sunday to decide pole. Spencer Pigot, driving the Ed Carpenter Racing Chevrolet, led qualifying with a four-lap average of 230.083 mph. He was followed by 2018 winner Will Power of Australia (230.081) and Simon Pagenaud of France (229.854). The troubles for Alonso, whose top four-lap average was 227.224 mph, were exacerbated by a punctured tire in his first qualifying run. "That didn't help," Alonso told reporters. "But, obviously, our performance has been quite bad all week. Quite poor." The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a backup car was prepared. He returned on Friday. Alonso said he was worried the McLaren team was "not ready for the challenge." "We've been slow. You see Juncos Racing crashing yesterday and being ready at 6 o'clock. That's impressive," he said. "For us, we've been a little bit slow on everything." Alonso is bidding to join Graham Hill as the only drivers to achieve the 'Triple Crown of Motorsport' with an Indy 500 victory. He previously won the Monaco Grand Prix and Le Mans 24 Hours race. He also won two Formula One drivers' titles. (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Greg Stutchbury)Related Video: Motorsports Chevrolet McLaren IndyCar

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles