1963 Impala Ss Pro Touring on 2040-cars

Auto blog

First 2015 Chevy Corvette Z06 engine blows up at just 891 miles

You've waited and watched and waited some more for the arrival of your 650-horsepower, $78,000 Chevrolet Corvette Z06. Finally, that joyous day arrives and you eagerly, but gingerly, begin to break-in the 6.2-liter supercharged V8 monster under your hood. Then 900-odd miles after delivery, your excitement grinds, quite literally, to a halt. That's what the owner of one 2015 Z06 claimed happened to him when a simple break-in drive resulted in a lunched engine. The owner, known as Lawdogg149 on Corvette Forum, says he was out breaking-in his car ahead of a January track event when it happened. "While making a pull from 35 miles per hour, I accelerated and shifted short of redline, and boom - the car began knocking. I pulled over and popped the hood. I could hear a loud knock coming from the No. 6 cylinder area along with a serious, grinding, metal-on-metal sound coming from the supercharger area," Lawdogg wrote. A subsequent trip to the dealer confirmed his concerns, with the service facility telling Lawdogg that the No. 6 valvetrain had failed. The dealer couldn't research the issue further, though, as General Motors requested the engine be returned for a more thorough evaluation. The good news for the Z06's unlucky owner, at least, is that GM will be covering the engine replacement under warranty, an expense that Corvette Forum estimates is a nearly $24,000 procedure. At this point, the two leading theories behind the engine's detonation involve a manufacturing defect – which could be why GM is so keen to tear the blown powerplant down – or a mistake on the part of Lawdogg. As Motor Authority points out, such an error could be something as simple as the Z06's owner accidentally shifting to first rather than third during his 35-mph pull. If, however, there's a deeper manufacturing problem with the Z06's engine, this might not be the only case we end up hearing about.

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

Chevy Bolt will go into production in Michigan in 2016 [UPDATE]

While nothing official has been announced, it appears that General Motors may actually put the all-electric Chevy Bolt into production next year. That's the rumor that Reuters is reporting, citing two sources at suppliers for the upcoming $30,000 EV (although that $30,000 number bears some scrutiny). This rumor does fit in with earlier comments that the Bolt would arrive on the market in 2017. If it gets built, the Bolt will share more than a similar-sounding name with the Chevy Volt: the EV will be put together in metro Detroit. Reuters says the 200-mile electric car (and an Opel version) will be made in "an underused small-car plant north of Detroit," which means the Orion Township plant. GM could make between 25,000 and 30,000 Bolts a year there, if what the suppliers are saying is true. We have asked GM for a statement on this story and will update it if we hear back. UPDATE: General Motors manager of electrification technology communications, Kevin Kelly, told AutoblogGreen that, "Bolt EV Concept is just that – a concept. We're currently evaluating the vehicle program, but do not have any production announcements to make at this time."