1960 Chevrolet Impala on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Recharge Wrap-up: GM, LG Chevy Bolt collaboration, Honda Energy Star plants

Green Car Reports details the relationship between GM and LG in the development and production of the Chevy Bolt. The unique relationship between the two companies began in 2008, and now sees LG producing a multitude of systems for the Bolt, many of which were designed by or with GM. LG's involvement in the Bolt has gone so deep as "defining what will this vehicle be, everything from how we are going to package it, what size it should be, what kind of performance it should have," according to Pam Fletcher, GM's Executive chief engineer for electrified vehicles. Forgoing the traditional automotive relationship for a more collaborative one doesn't just save money, but it also gives GM access to LG's suite of technologies and manufacturing capabilities. Read more at Green Car Congress. The EPA has awarded three Honda factories with Energy Star certification. The automaker's assembly plants in Marysville and East Liberty, Ohio have now earned Energy Star certification ten consecutive years. The Marysville plant added LED lighting, hydrogen-powered tow motors and forklifts, high efficiency HVAC and direct-fired water boilers. The East Liberty facility added new LED lighting and replaced a large water heater with a high-efficiency one. Honda's newest US plant, Honda Manufacturing of Indiana, installed LED lighting and used energy efficient features in its recent expansion. Honda also cites a culture of energy-mindedness – for every associate – for its success. "When everyone involved considers energy efficiency and how they can help the environment, results improve," says Karen Heyob, Honda's sustainability boss in North America. Read more from Honda. The student-led Associated Students of the University of Montana (ASUM) Transportation has ordered two Proterra electric buses. The 40-foot Catalyst Fast Charge buses will serve the campus, and will recharge with a semi-autonomous fast charger. "As part of our ongoing effort to innovate service, align with student advocacy and reduce our carbon footprint, we take great pride in our decision to go electric," says ASUM Office of Transportation Director Jordan Hess. "We hope this encourages – and challenges – other universities to seriously consider the economic and environmental benefits of zero-emission buses." Read more in the press release below. First Student-led Transit Agency in the U.S.