1959 Chevy Impala Original 348 Motor A/c Complete Car Great Project Low Reserve on 2040-cars

Auto blog

Chevy recalls 73k Cobalts for side airbag non-deployment

Chevrolet is recalling 73,424 examples of the 2010 Cobalt in the US and Canada because the driver's side curtain airbag might not deploy in a crash. These vehicles carry build dates between January 4 and June 23, 2010, and, specifically, 59,474 of them are in the US. "GM is aware of one crash with one injury that may be related to this condition," the company said in a statement. The problem occurs because of improper routing of the side-impact sensor wiring harness in the driver's door, and there can be a short circuit causing the curtain airbag not to deploy. The campaign to fix the issue will begin on August 26. Dealers will inspect the vehicles and will repair the issue on any affected examples. Related Video: GM Statement: General Motors is recalling 59,474 2010 Chevrolet Cobalt sedans in the U.S. because some of them may have been built with improper side impact sensor wire routing in the left front door. Dealers will inspect all suspect vehicles and any found with the condition will be repaired free of charge to the customer. GM is aware of one crash with one injury that may be related to this condition. Including vehicles sold in Canada, the total recall population is 73,424. RECALL Subject : Improperly Routed Side Impact Wire Harness Report Receipt Date: AUG 10, 2015 NHTSA Campaign Number: 15V500000 Component(s): AIR BAGS Potential Number of Units Affected: 59,474 All Products Associated with this Recall Vehicle Make Model Model Year(s) CHEVROLET COBALT 2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2010 Chevrolet Cobalt vehicles manufactured January 4, 2010, to June 23, 2010. The affected vehicles may be equipped with an improperly routed Side-Impact Sensor (SIS) wiring harness in the driver side front door. The misrouted wiring harness could cause an electrical short that disables the driver side curtain air bag. CONSEQUENCE: A disabled driver side roof-rail air bag will not deploy in the event of a crash necessitating deployment of that air bag, increasing the risk of injury to the driver. REMEDY: GM will notify owners, and dealers will inspect the sensor's wiring in the driver's door and make repairs as necessary, free of charge. The recall is expected to begin August 26, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 15075.

Chevrolet FNR is a sharp vision of the future in Shanghai

The Shanghai Motor Show is about more than just displaying the latest extended-wheelbase luxury sedans to the Chinese populace. Chevrolet is taking advantage of the event to debut its vision of the future of motoring with the FNR concept, and the capsule looks like it could be fresh from off the set of Blade Runner. The FNR imagines what a fully autonomous, electric vehicle might look like many years from now and is meant to appeal to young, Chinese consumers. The concept's design from the minds at GM's Pan Asia Technical Automotive Center does a pretty neat magic trick, too. Most times it's a mass of glass and curving lines that looks very sci-fi, but then the dragonfly doors open upwards to reveal some knife-edged angles in the styling, as well. As a cutting-edge concept, this capsule is also packed with futuristic tech. Power comes from magnetic hubless electric motors in each wheel, and it could charge wirelessly. Crystal lasers generate the headlights and taillights, and radar in the roof would allow scanning the surroundings for autonomous driving. The interior is similarly imaginative as the rest of the styling. Passengers are enveloped in blue light while sitting in mostly mesh chairs with huge bolsters. Keys have been done away with entirely in favor of iris recognition. Once on the road, the front seats even swivel around to more easily talk with rear passengers. Check it all out in the gallery above for a glimpse a Chevy's vision of what might be next. Related Video: Chevrolet-FNR and All-New Chevrolet Malibu Make Global Debut at Shanghai GM Gala Night 2015-04-19 SHANGHAI – Two Chevrolet models, the Chevrolet-FNR and all-new Malibu, made their global debut this evening at Shanghai GM Gala Night. They were joined by the Bolt EV concept and the 2015 Captiva, which made their China debut. The new models were introduced as Shanghai GM celebrates the 10th Anniversary of its Chevrolet brand in China. They will appear alongside 12 other models on the Chevrolet display at Auto Shanghai 2015, this year's leading auto show in China, which starts tomorrow. Chevrolet-FNR The Chevrolet-FNR is an autonomous electric concept vehicle that offers a glimpse at mobility of the future. It was developed in Shanghai by GM's Pan Asia Technical Automotive Center (PATAC) joint venture. Engineering, design and electrification teams drew on their past experience developing electric concept vehicles.

GM investing $439 million in Corvette plant

General Motors is slowly trickling out announcements about its $5.4 billion in US plant upgrades over the next three years. The latest one is something that fans of one of America's most beloved sports car will be happy about. The Bowling Green, KY, factory that assembles the Chevrolet Corvette is receiving $439 million of those funds to build a new paint shop. Covering 450,000 square-feet, the site will make painting the 'Vette more efficient and environmentally friendly. The upgrades there include robots that use paint more effectively, technology to eliminate sludge water, LED lighting to improve inspections, and less energy-intensive baking ovens. While the groundbreaking is already complete for the building, full construction is expected to begin this summer and take two years. This is the biggest upgrade for the Kentucky factory in a few years. In preparation for the latest Corvette, the Bowling Green plant received $131 million in 2011 for upgrades and to add more workers there. Related Video: Chevrolet Corvette Plant Gets $439 Million in Upgrades New, environment-friendly paint shop drives efficient production, retains 150 jobs 2015-05-21 BOWLING GREEN, Ky. – Torch Red, Shark Gray Metallic and Laguna Blue Tintcoat, three popular palate choices on the 2015 Corvette, kept the marketers who make up names working late. Now they can dream about more painstakingly precise pigments, thanks to a new paint shop that is among $439 million being invested at the only plant in the world that builds Chevrolet's iconic sports car. General Motors announced the moves today that include retaining 150 jobs and building the 450,000 square-foot paint shop that is almost half the size of the entire current production facility. The investment builds on approximately $135 million GM has invested in the plant over the last four years for the new Corvette Stingray and Performance Build Center. The announcement was followed by a groundbreaking event for the new paint shop. "The Corvette is one of Kentucky's most-cherished icons," said. Lt. Gov. Crit Luallen. "Such a significant expansion of the Bowling Green Assembly Plant will help the company remain competitive in the region and around the world." Construction of the new paint shop, which includes substantial technology upgrades, is planned to begin this summer and take approximately two years to complete. Corvette production schedules will be unaffected by the construction.