1959 Chevy Biscayne 348 Three Deuces 4 Speed Trans Super Solid Great Driver on 2040-cars

Auto blog

Chevy Corvette is latest car breached by hackers

UPDATE: This story has been updated with comment from General Motors. In the latest car-hacking exploit in a summer full of them, researchers from the University of California-San Diego say they've found a way to manipulate braking in a 2013 Chevrolet Corvette. The vulnerabilities may not be limited to that model. Cyber-security researchers breached the car's security systems via a device they had plugged into the Corvette's OBD-II port, and through that connection, they sent messages that could turn windshield wipers on and off and tamper with the brakes as the car drove at low speeds. It's the latest in a series of car hacks that involve access to critical systems obtained via the OBD-II port, where drivers can plug in devices that provide anything from diagnostic information for mechanics to driving information for insurance companies. Last November, cyber-security engineers from Argus Cyber Security remotely controlled vehicle functions in a car that had a OBD-II dongle called a Zubie installed. In January, researchers from Digital Bond Labs found security holes in an information-tracking dongle popular with more than 2 million Progressive Insurance customers. Those came before prominent hacks unveiled in recent weeks, in which researchers remotely commandeered control of a Jeep Cherokee and, separately, showcased problems with GM's OnStar infotainment system. Regarding the dongles that plug into the OBD-II ports, Stefan Savage, a Cal-San Diego professor involved in the research, tells WIRED that, "we acquired some of these things, reverse-engineered them, and along the way, found that they had a whole bunch of security deficiencies." Savage and others unveiled the latest study at the Usenix security conference Tuesday. In a video of their exploit entitled "Fast and Vulnerable," they show how they sent SMS messages from a smartphone to the dongle plugged into the car's OBD-II port. From there, their messages accessed the CAN bus, a network on the car that connects individual electronic control units, which control dozens of vehicle functions. As they send the commands to brake the car, the driver of the Corvette notes "the pedal doesn't react to any pressure." General Motors issued a written response Wednesday, warning drivers to be careful with third-party devices they plug into their OBD-II ports.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM opens official investigation into C8 Corvette transmission leaks

In March 2020, a month after Chevrolet began customer deliveries of the 2020 C8 Corvette, a GM dealer technician created a Reddit thread about a leaking gearbox in a Corvette with 32 miles. That car hadn't even been sold yet. Since then, as a search of "C8 Corvette transmission leak" shows, it's been tales of woe for some owners. Something in the Tremec TR-9080 transaxle in the back of the mid-engined Corvette doesn't work as it should, the fault able to cause codes that the transmission needs service, or that the driver needs to shift to park. In some cases, the battery would die because of follow-on issues after the initial transmission code, that code preventing the car from powering down. As Autoevolution reports, GM filed paperwork with the National Highway Traffic Safety Administration in August to look into what's going on. Between forum threads and GM's investigation document, there are several issues mentioned. The most common appears to be the dual-clutch transmission leaking fluid due to gasket failures like the one suffered by one owner at 858 miles, and another for an owner currently enduring a second leaking transmission. The Midengined Corvette Forum reported that Chevy engineers redesigned the TR-9080 pan, fitting Corvettes with the new unit at some point in the 2021 model year. The original pan was stamped steel unit affixed to the engine with two studs and 13 bolts, plus "reinforcement plates." The updated pan is said to be a cast aluminum unit affixed with two studs and 17 bolts, omits the reinforcement plates, and gets a new machined new groove around its edge to seat the gasket seal. The GM paperwork now at the NHTSA mentions a P1789 code, and says one reason for it could be "debris on the park position sensor magnet causing an incorrect position reading to the TCM." This might be caused by another issue mentioned in forums, which is clogged transmission filters. GM gives instructions for returning transmission filters to the company, and a poster on one forum said the Corvette tech at the dealer where he bought his Corvette told him the automaker "requires every used transmission filter to be returned to GM."  Whatever's going on, the problems haven't stopped, and they go beyond the P1789 code. Over the weekend, a 2022 Corvette owner posted on Corvette Forums that he got a check engine light on his car after just 850 miles.