on 2040-cars

Auto blog

Six-week production shutdown planned for 2016 Chevy Volt

It's no surprise that GM is winding down production of the first-gen Chevy Volt as it prepares to start building the second-gen for a launch in the second half of this year, but for now, things are proceeding as planned, according to Chevrolet spokesperson Michelle Malcho. Malcho told AutoblogGreen that GM "is still making first generation Volt" and that there has been no announcement about when that will change. The only details she would divulge is that, "It will be this summer." "Halting Chevrolet Volt production in anticipation of the all-new 2016 model year is a smart move for GM," Akshay Anand, an analyst at Kelley Blue Book's KBB.com, said in a statement. "[The move] allows for less inventory and incentives on the outgoing model. Hybrid and alternative fuel vehicle sales have been declining for some time now, with gas prices well below the summer prices of 2014." Volt production will cease in the weeks before the traditional two-week auto plant shutdown over the July 4 holiday. A high inventory of Volts is a factor in the production cuts, but not the only one, Malcho said. The plant construction, engineering changes and pre-production plans for the new Volt and CT6 all were part of the decision, she said. Nationwide, there is about a 200-day supply of Volts on dealer lots (roughly 100 days in California, the car's biggest market), according to the Detroit Free Press, which says there will be a six-week retooling period (twice as long as normal, but other sources say the shutdown will be four weeks long) at GM's Hamtramck plant this summer to get ready for the second-gen model. The 2016 Volt will get an increase in all-electric range to 50 miles and will then get 41 miles per gallon when the battery runs out. It also has a fifth seat that straddles the battery tunnel and a larger li-ion battery. Related Video: The AP contributed to this report. Featured Gallery 2016 Chevy Volt View 16 Photos News Source: GM, Detroit Free Press Green Plants/Manufacturing Chevrolet Electric Hybrid

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.