2003 Limited Custom Explorer Van, White, Leather Interior, Good Condition on 2040-cars

Auto blog

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

A Chevy Camaro hybrid? That's what EcoCAR3 could bring

Figuring out a way for a hybrid powertrain to co-exist with the performance expectations of a classic American muscle car is a challenge that could vex that most experienced of automotive engineers. It's a challenge, in fact, being handed to a bunch of college students. Over the next four years, students from 16 North American colleges and universities will attempt to wring fuel efficiency from a 2016 Chevy Camaro as part of EcoCAR3, an advanced-vehicle technology competition sponsored by the Department of Energy, General Motors and others. They'll be attempting to use hybrid or plug-in hybrid technology while not sacrificing the performance of the Camaro, which was selected in part because the current model achieves just 17 miles per gallon in city driving and 28 MPGs on the highway, per EPA numbers. Students will get the latest version of the vehicle to work on, one that is expected to be unveiled next month on Belle Isle in Detroit. "If we still want to produce V8 Camaros, we're going to have to look at alternative methods of propulsion," said Al Oppenheiser, the chief engineer on the Camaro. "So the ideas that these college teams come up with could very easily be adapted to a car like the Camaro." Unlike similar competitions that reward fuel efficiency in vehicles, EcoCAR seeks those gains while emphasizing cost and consumer acceptance of these vehicles. The cars shouldn't look like experiments; they should look like everyday vehicles on the road. Previous competitions have allowed the teams to use whatever powertrain they desired. This time, EcoCAR officials designed the competition to concentrate on hybrid, hybrid-electric and diesel options. Competitors won't have the option of using hydrogen fuel cells as they have in the past. Last year, a team from Colorado State built a vehicle that contained both hydrogen and electric power sources. This year's limit is a curious choice, as some automakers such as Toyota have placed heavy bets on fuel cells in recent years. General Motors also runs a fuel-cell program. With the focus on cost and practicality, however, the program officials wanted to narrow the framework of the contest. "We always have some good decisions on what to make within the scope or out of scope," said Jim Kolhoff, global director of software engineering for General Motors.