2014 Chevrolet Cruze Ls on 2040-cars

Auto blog

Has Chevrolet gotten the formula right with the Malibu?

Since the Malibu's return in 1997, there has been an internal issue with Chevrolet with getting the midsize sedan formula right in its own way. Let's be frank, the Malibu had a boring beginning as a midsize sedan in 1997. We got the dreadful sixth-generation Malibu in 2004 that brought us an SS model that really didn't deserve the SS badge on it. Hell, its saving grace was fleet sales. But the tides seemed to shift when the seventh-generation Malibu came on the scene in 2008. With the determination of making the Malibu more competitive with other cars in its class, a lot of hard work and effort was put into making the seventh-generation Malibu a timeless and well-crafted vehicle. As an owner of a 2012 Malibu 1LTZ, I have to say that Chevy has fully accomplished it. I love the nicely designed exterior, the interior was comfy enough for those long trips to work each and every day, and it was a very quiet car in my opinion. And its fuel economy was decent, not too bad. The New York Times in 2008 referred to it as "A super Accord, but from GM." In some comparisons, the Malibu was ranked higher than the Honda Accord and the Nissan Altima. It also received the North American Car of the Year award. Love it or hate it, the seventh-gen Malibu was an overall big success for GM. But then in 2013 we got the eighth-generation Malibu. GM gave it a botched release, releasing an Eco model first (that was later discontinued), then later in the year GM released the regular Malibu models. Shifting to a new platform didn't help it either. Even though it separated it further from the Impala, which was built on the same platform as the last-gen Malibu, the shrinkage in legroom, its OK design language, and a poorly crafted interior helped contribute to its overall lackluster sales performance. Not to mention the cars in its class got 10x better than the Malibu as well. Just 18 months after the 2013 Malibu went on sale it received a mild refresh to try to help its OK design, but it didn't help at all. The fate of the eighth-gen Malibu was sealed early on. But wait, a new light came from GM early last year. It came in the form of the ninth-generation Malibu. I have to say, when the curtain came off of it last year, a huge sigh of relief came from me. To me it seemed that Chevrolet took that determination it had in crafting the seventh-gen Malibu and increased it this time around.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

'Killing a Duramax' Gale Banks YouTube series methodically tunes a diesel to death

Learning or perfecting a skill by watching YouTube videos is known as attending YouTube University. GM Authority picked up on one of the video site's more fascinating courses, hosted by Gale Banks; in a fair world, he should be referred to as Professor Banks when it comes to diesel engines and truck tuning. A few months after GM introduced the updated L5P 6.6-liter Duramax diesel V8 in the 2020 Chevrolet Silverado HD and GMC Sierra HD that ships with 454 horsepower and 910 pound-feet of torque, Banks decided he wanted to methodically tune the engine to death. The purpose of the resulting series, called "Killing a Duramax," is to push more power out of the engine in order to discover which parts break and when — or, as Banks puts it, force-feed the Duramax "until the crank hits the street and the heads hit the hood." With that knowledge, Banks can figure out all the weak points on his way to building what he calls a "Superturbo," that being a supercharged, twin-turbo race engine with more than 1,000 hp. What makes the series fascinating is Banks' knowledge, paired with the company's comprehensive iDash engine monitoring system that keeps tabs on a glut of parameters every step of the way. So for instance, you get Banks explaining the differences between inches of mercury and barometric pressure, how those are different from the water content of the air measured in grains, then showing those readouts on the iDash, then explaining in detail how they affect the air density in the Duramax system. The stock Borg-Warner variable turbo gets a lot of airtime — Banks accuses it of being "out to lunch" because he feels it's the weakest link on the engine. That turns into a turbo teardown and a deep explanation of performance pitfalls, such as when air pressure on the turbine begins to diverge from the boost pressure coming from the compressor. Banks says he can keep close tabs on where power's coming from, because the iDash monitors the horsepower contribution provided by the ambient air, the turbo, and the intercooler separately. The major changes so far are a stouter Precision 7675 turbo and TurboSmart wastegate (episode 5), a twin intake (episode 6), a custom liquid-cooled intercooler from a marine engine, a new GM oil cooler and synthetic oil (episode 10), and new injectors (episode 11).