2008 Chevrolet Corvette Base Convertible 2-door 6.2l on 2040-cars

Auto blog

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Corvette Z06. Nissan GT-R Nismo. Motor Trend Head 2 Head. 'Nuff said.

Here is a video we've been waiting for, one that will get broadband fiber optic cables glowing like Hooker headers on a dyno. For Episode 62 of Head 2 Head, Motor Trend throws the 2015 Chevrolet Corvette Z06 into the bear pit with the latest Nissan GT-R Nismo. What comes out of that is seventeen minutes of don't-look-away video. We're only going to give you the specs. The 3,527-pound Z06 gets on with a supercharged 6.2-liter V8 with 650 horsepower and 600 pound-feet of torque, applied to the wheels via a seven-speed manual transmission. With the Z07 performance package appended it has a front splitter and winglets, and a three-section rear spoiler among its aero aids. The tested model also wore carbon ceramic brakes, which helped push its $89,985 MSRP out to $105,210. The 3,881-pound GT-R Nismo plays the underdog – again – with a 3.8-liter twin-turbo V6 spitting out 600 hp and 481 lb-ft, yoked to a six-speed dual-clutch transmission. The GT-R left its 'performance bargain' days behind years ago, and this top-shelf version starts at $151,585 but has almost everything it can get, so the as-tested price was only a skosh more at $151,880. We're not going to tell you any more than that. Click on the video and let Carlos Lago and his two mean minions tell you a story you won't soon forget. Related Video: News Source: Motor Trend Channel via YouTube Chevrolet Nissan Coupe Luxury Performance Videos motor trend nissan gt-r nismo head 2 head