Corvair Greenbrier Delux 1965 on 2040-cars

Auto blog

2016 Chevrolet Camaro powers up, slims down

Don't be fooled by its familiar appearance, the 2016 Chevrolet Camaro is vastly different than its iconic predecessors. It has a new chassis, a fresh engine lineup, and is loaded with clever technologies that promise to invigorate and improve the sixth generation of Chevy's legendary sports car. It was revealed Saturday before a crowd of enthusiastic Camaro revelers on Belle Isle in Detroit. Redesigning the sports coupe was a heady task, especially as its archrivals, the Ford Mustang and Dodge Challenger, drive better and are more powerful than ever. But the new Camaro is aiming to be the best combination of handling and raw performance, with quick acceleration and competitive fuel economy. "Redesigning the Camaro is thrilling and challenging all at once, but the secret is to offer something more," Mark Reuss, General Motors executive vice president of product development, said in a statement. It all began with a weight-loss plan. The new Camaro shed more than 200 pounds compared with the outgoing car, with 133 pounds coming from a lighter body-in-white. Then engineers culled weight nearly everywhere, using aluminum for the instrumental panel frame and some suspension components to trim as much fat as possible. The slimmer body rests on new bones. The Camaro's rear-wheel-drive platform is lighter and stiffer in a bid to improve handling. It's a modified version of the underpinnings used by the Cadillac ATS, though about 70 percent of the architecture is unique to the Camaro. Chevy said structural rigidity is improved by 28 percent. As you'll see, healthy doses of Cadillac and Corvette technologies have been used to bolster the Camaro's drive character and performance. The new car is also expected to handle better thanks to a slightly smaller footprint. It is about two inches shorter in length, with most of that due to the more compact wheelbase. It's also an inch shorter in height and an inch slimmer in width. So yes, the Camaro will be leaner, but it will still be plenty mean. The Camaro SS tops the range (for now) with the Corvette's 6.2-liter V8 pushing put 455 horsepower and 455 pound-feet of torque. Known as the LT1, is has a cast aluminum block and cast aluminum cylinder heads, and it's fortified with direct injection, variable valve timing, and cylinder deactivation. About 20 percent of the engine's parts are said to be unique to the Camaro, including the exhaust manifolds.

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

Domino's reveals Chevy Spark-based delivery car

Next time you order from Domino's Pizza, check out the delivery car. In an effort to get hot and fresh pizzas to hungry customers, the company is creating a small run of custom vehicles that are tailored for the job. Dubbed the Domino's Delivery Expert (DXP), these 2015 Chevrolet Spark-based hatchbacks pack a plethora of features to provide the perfect pie. When the DXP's on delivery duty, every order should arrive steaming hot thanks to the hatchback's biggest custom upgrade – a warming oven right behind the driver. Accessible from outside, it can keep pizzas at the perfect temperature on the way to your house and hold two of Domino's Heatwave bags. Other than the driver's seat, the rest of the interior also gets replaced with bountiful storage and non-slip surfaces. According to the company, as many as 80 pizzas could conceivably fit inside, and that would be quite a party. The exterior is still clearly derived from the Spark but with some clever additions. An illuminated "Out for Delivery" sign is on the roof, and a puddle light shoots the Domino's logo on the ground. Plus, the company's red-and-blue color scheme is emblazoned over the hood, pillars, and hatch. Underneath all the pizza-related mods, power comes from a 1.2-liter four-cylinder and CVT. Rather than just a one-off stunt, Domino's is working with Roush Enterprises and former General Motors exec Kenneth R. Baker to build 100 DXPs. They're hitting the streets in 25 US cities, and you can check if your locale is included on the project's website. The seed of this idea came from a partnership with Local Motors to crowdsource the ultimate pizza delivery platform. Domino's Launches Purpose-Built Pizza Delivery Vehicle Domino's Innovative DXP™ Created by Three Great Michigan Brands and an International Crowdsourcing Design Competition Ann Arbor, Mich., Oct. 21, 2015 -- In its latest innovation as the recognized world leader in pizza delivery, Domino's (NYSE:DPZ) is launching the Domino's DXP™ (Delivery Expert), a specially designed and built pizza delivery vehicle. The DXP is the combined brainchild of former GM R&D executive Kenneth R. Baker, Michigan-based Roush Enterprises and Domino's. To also include consumers' input, hundreds of concepts were initially identified in an online crowdsourcing design competition hosted by Local Motors. "The Domino's DXP is the first purpose-built vehicle aimed at revolutionizing pizza delivery," said Russell Weiner, president of Domino's USA.