2006 Chevrolet Cobalt Ss Sedan 4-door 2.4l Alarm, Leather Interior Only 48k L@@k on 2040-cars

Auto blog

Recharge Wrap-up: Detroit Electric teaser video, Nissan Leaf is Good Housekeeping "Tried and Tested"

Detroit Electric has a new teaser video and has updated its brand in preparation of the introduction of the SP:01. The refreshed logo uses a blue and white color palette, and the company has also given its website a new look. The teaser video, which gives a sneak peek at the exterior of the SP:01, shows the car taking form in the midst of an electrical storm. Watch the video or learn more in the press release below. Abengoa is celebrating the grand opening of a commercial scale cellulosic ethanol plant in Hugoton, KS. When running at full scale, the refinery will produce up to 25 million gallons of ethanol a year. The plant will also generate enough electricity to power itself and put some back into the grid. Energy Secretary Ernest Moniz was on hand for the dedication, saying, "Every gallon of cellulosic ethanol produced and used to fuel our vehicles reduces the impact of harmful greenhouse gas emissions by greater than 60 percent as compared to conventional gasoline." Learn more at Energy.gov. Good Housekeeping has named the Nissan Leaf one of its "Tried and Tested" vehicles. The magazine called the Leaf SL its top "Roomy Electric" vehicle in its November issue. The magazine's research institute evaluated the EV based on track and road driving, ergonomics and convenience features. Good Housekeeping made note of the car's "impressive" range, but according to Nissan's Fred Diaz, "the real beauty of the Nissan Leaf is that it's roomy and, best of all, fun to drive." Read more in the press release below. Quasar Energy Group produces compressed natural gas from sewage and garbage. It uses things like grains leftover from brewing Budweiser, food waste from a baseball stadium and sewage sludge to produce the gas through anaerobic digestion. The compressed gas can then be used to power cars like Chevrolet's Bi-fuel Impala, which goes on sale later this year. Chevrolet likens the situation to the Delorean time machine in the Back To The Future movie series, which uses garbage to fuel its fusion generator. Watch the video and read the press release below to learn more. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Watch this creative way to pull a truck's engine

Living in an apartment complex has its benefits, but for shade-tree mechanics who like/need to work on their own cars, it definitely has a number of disadvantages. Relatively simple tasks such as brake jobs and oil changes are difficult when you don't have dedicated driveway space, to say nothing of more in-depth repairs... like pulling an engine, for example.
For these types of challenges, a little ingenuity and plenty of muscle are needed to get the job done. Scroll down to watch these four men snatch the V8 out of a Chevrolet K1500 using nothing but a chain, landscape timber and good ol' fashioned brute strength. Good work, gentlemen.