1971 Chevy Malibu on 2040-cars

Auto blog

New Chevy Small Block crate engine has 405 hp, endless possibilities

With decades of history, the Chevrolet Small Block V8 has definitely stood the test of time, and the company has kept finding ways to make it better. At this year's SEMA Show in November, Chevy Performance is unveiling the latest upgrade to that legacy with the new ZZ6 350-cubic-inch (5.7-liter) crate engine. Offering 405 horsepower and 405 pound-feet of torque, the mill should add a big dose of power to any project car. For the ZZ6, Chevy is working to improve the Small Block's high-rpm performance. To make that happen, the engine has Fast Burn aluminum cylinder heads and an updated valvetrain inspired by the LS family of powerplants. Large intake runners help with the airflow, and the valve springs use a tapered design that allows for less reciprocating mass. The mill also packs a forged steel crankshaft and high-silicon aluminum pistons inside of a cast iron block. Chevy is offering the engine in two versions depending on what the builder needs. The Base configuration comes with an intake, distributor, water pump, and a few other parts but lacks carburetor and accessories. Conversely, the Turn Key option has everything, including the carb, air cleaner, starter, alternator, and more. More details about their availability will be announced at SEMA. NEW ZZ6 CHEVY SMALL BLOCK ADVANCES CRATE ENGINE LEGACY Revised Fast Burn heads with LS-inspired valvetrain enhance high-rpm performance 2015-10-02 DETROIT – Developed with contemporary technologies, including a high-rpm valvetrain, Chevrolet Performance's new ZZ6 crate engine offers builders a modern twist on the classic Chevy Small Block 350. It uses updated Fast Burn cylinder heads with beehive-style valve springs inspired by the LS engine family – a feature that enhances high-rpm capability, enabling the new high-performance engine to achieve 405 horsepower and 405 lb-ft of torque. That's more power than any factory produced 350 engine ever installed in a Chevrolet production vehicle and it's one of the most powerful 350 Small Block-based crate engines in the nearly 27-year history of the "ZZ" lineup. "The new ZZ6 is the ultimate ZZ 350-based crate engine from Chevrolet Performance," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports.

General Motors reportedly considering small electric pickup

General Motors is considering adding a small entry-level model to its range of electric pickups, according to a recent report. The carmaker is currently showing a prototype to a select group of customers to gather feedback about the model before executives decide its fate. Industry trade journal Automotive News claims that it saw the pickup during a workshop organized by General Motors and describes it as being "smaller than the Ford Maverick and the Hyundai Santa Cruz." For context, the Maverick stretches about 200 inches long, 73 inches wide, and 69 inches tall, so it's around 12 inches shorter, 11 inches narrower, and 10 inches lower than the recently-unveiled Chevrolet Colorado. It sounds like this little GM truck would be closer in size to the Brazilian-market Chevy Montana, pictured at top. But unlike the Montana, the model that Automotive News got a look at had two doors, a "low roofline," a four- to four-and-a-half-foot cargo box, and a design described as futuristic and sporty. If launched, the yet-unnamed pickup would be marketed as an "affordable" EV with a base price pegged under $30,000. However, that's a big if: the pickup — whose name hasn't been announced — hasn't been approved for production. "We're creating these to get a reaction and then to try to modify it or move on," Michael Pevovar, the director affordable EV and crossover design for Chevrolet, told the publication. "The input may come back that it's just too small, and that's okay," he added. If it turns out to be too small for buyers, General Motors hasn't ruled out building its entry-level electric pickup on a different architecture to make it a little bigger. It's too early to tell where the electric pickup would slot in the General Motors portfolio if executives approve it. Chevrolet immediately comes to mind, especially considering the sub-$30,000 price point. The model would make more sense with a bowtie on its front end than with a Cadillac emblem, GMC's trucks are normally positioned higher than Chevrolet's, and Buick hasn't built a pickup in many decades. Similarly, there's no word on when it would enter production or where it would be built. With that being said, there's very clearly a market for affordable, small pickup trucks. As of the third quarter of last year, Ford had sold more Mavericks than it had the Expedition or the Ranger. Hyundai hasn't sold as many Santa Cruz trucks, but it's still not too shabby, having beaten out the Venue and Accent last year.

GMC Envoy could be returning as GM files for 'Envoy' trademark

The GMC Envoy could be on its way back, if a recent GM trademark filing is any indication of the future. To be exact, GM's trademark filing is for the name "Envoy," and is applicable to "motor vehicles, namely, sport utility vehicles, engines therefor and structural parts thereof." A victim of the recession and high gas prices, the original Envoy – related to the Blazer, and more recently the TrailBlazer and similar GM SUVs – was discontinued after the 2009 model year. In today's SUV-happy market of low gas prices, unearthing the somewhat familiar Envoy name makes a certain amount of sense. As soon as gas prices start trending in the other direction, we'll all be saying the opposite, though. What this SUV will take shape as is the big question now. With the Chevrolet Blazer well and truly on its way, there's every reason for a GMC version of Chevy's stylish new crossover sporting the Envoy name. Another, less likely, possibility is a Traverse-sized vehicle to slot between the shorter Acadia (10 inches shorter than the Chevy Traverse) and the body-on-frame Yukon. GM could come out of left field and make the Envoy a Buick too. It fits the bill with the "En" beginning, and Buick undoubtedly has crossovers in the works. We think that's even more unlikely, but it's important to remember that we're still in the speculation phase. Soon we'll drive Chevy's new Blazer, and perhaps have more news then. Check in next week for that. Related video: