1969 Blue 350 4 Spd Runs & Drives Great Body & Interior Ok! on 2040-cars

Auto blog

GM ending stop-sale order on heavy-duty trucks

General Motors responded to an inquiry from Autoblog regarding a stop-sale order on its full-size heavy-duty pickup trucks. Here's GM's official statement. GM is committed to building the highest quality products possible. We paused delivery on a small number of HD pickups with the 6.6 liter Duramax engine last week to finalize an investigation into a potential quality issue. The investigation has been completed and the stop sale will be lifted for the small number of vehicles at dealerships.Customers can be assured GM’s heavy duty pickups are covered by a 5 year/100,000 mile powertrain warranty. The original article continues below. General Motors has reportedly sent its Chevrolet and GMC dealers a stop-sale order that applies to some examples of the 2022 Silverado HD, the 2022 Silverado MD, and the 2022 Sierra HD. The units affected by the stop-sale order may develop an engine-related problem. Citing anonymous sources, website GM Authority wrote that the Duramax 6.6-liter turbodiesel V8 in the affected trucks can hydrolock, which means liquid could enter the cylinders and cause a substantial amount of damage. The report does not specify where the liquid would come from; hydrolocking can happen by driving through a deep puddle of water, for example, but a large amount of coolant can cause it as well. The publication adds that the stop-sale order was assigned internal reference number N222362910. It also notes that the trucks included in it can't be sold, delivered to buyers, traded with another dealer, sent to auction, or even used for demonstration purposes until further notice. Earlier in April 2022, GM Authority reported that General Motors planned to buy back an unspecified number of Silverado HD and Sierra HD trucks due to quality-related issues with the 6.6-liter V8. Details about the problems experienced by customers haven't been released; all we know is that each truck will be replaced, though the replacement may not have the same equipment due to the ongoing chip shortage. Related video:

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle