1966 Chevrolet Chevelle Ss on 2040-cars

Auto blog

GM plans new car family for global markets, $5B investment

Globalization remains all the rage in the auto industry, as manufacturers scramble to develop single vehicles that can easily be adapted to the world's disparate market places. Ford has been a champion of this movement, with its One Ford mandate, but now, its cross-town rival is getting in on the action, albeit on a smaller scale. General Motors has announced a $5-billion investment to develop a new Chevrolet-badged family vehicle for global growth markets, including Brazil, Mexico, India, and importantly, China. With the PRC listed as a target market for the new vehicle, it's no surprise that GM is teaming with its Chinese joint-venture partner, SAIC Motor, to develop the vehicle's architecture and engines. The first vehicles should be hitting dealers by 2019, with GM expecting to eventually move some two million units per year. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," GM President Dan Ammann said in the attached statement. "Strengthening Chevrolet's position through this major investment is consistent with our global strategy to ensure long-term profitable growth in the markets where we operate." GM is quite focused on developing markets for a new vehicle, going as far as to say that "mature markets" like the US aren't currently being considered for the new family vehicle. As for where it will be built, the press release specifically says it won't be exported to the US, meaning it will very likely be built abroad using parts from local suppliers. Read on for the official press release from General Motors. Chevrolet Strengthens Position in Growth Markets with $5 Billion Investment 2015-07-28 All-new vehicle family tailored to local customer requirements General Motors and SAIC Motor partnership further enhanced DETROIT – Chevrolet announced today it is investing $5 billion to strengthen its business in global growth markets through the development of an all-new vehicle family that will meet the rapidly changing demands of customers in these markets. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," said General Motors President Dan Ammann.

GM tells owners not to use SUV wipers due to fire risk

General Motors is recalling 31,685 examples of the 2016 Buick Enclave, Chevrolet Traverse, and GMC Acadia because a short circuit in the windshield wiper motor can potentially lead to a fire. Due to the danger, the company is asking owners not to use the wipers until the problem is fixed, according to The Detroit Free Press citing the Associated Press. A manufacturing defect in the wiper motor cover means that the electrical terminals can come into contact and cause a short. The part could "melt, smoke, or catch fire," according to a statement from GM. The company will get them fixed immediately, and dealers will replace the cover. If there's bad weather at the time the owner specifies to get the recall work completed, the automaker will come pick up the crossovers. Depending on parts availability, the automaker will supply a rental car for customers, as well. The issue was discovered at the factory. According to the company's statement, only 6,405 actually made it to customers, and they were notified immediately by overnight letter. The rest were in dealer stock. The affected crossovers carry build dates between August 18, 2015 and September 24, 2015. Of those, there are 29,295 in the US and 1,073 in Canada. GM Statement: General Motors has told the National Highway Traffic Safety Administration that it will recall approximately 29,295 2016 model year Chevrolet Traverse, Buick Enclave and GMC Acadia SUVs in the U.S. because the front windshield wiper motor may overheat when in use because of a manufacturing defect. In some cases, the front windshield wiper motor cover may melt, smoke or catch fire. The approximately 6,405 customers who have taken delivery of these vehicles were notified by overnight letter and are urged to contact a GM dealer as soon as possible to arrange a service appointment. These customers should not use the front windshield wipers until they have been repaired. If weather conditions prevent driving the vehicle without using the windshield wipers, GM will arrange to pick up the vehicle for servicing. If repair parts are unavailable, GM will provide a rental car at no cost until parts become available. The total population, including Canada, Mexico and exports, is approximately 31,685. About 25,280 of these vehicles are in dealer stock and will not be sold until repairs are made.

Callaway rolls out radical Corvette C7 GT3-R at Hockenheim

Leave it to Callaway to take a badass Corvette and make it even more so. Case in point: the new Callaway Corvette C7 GT3-R you see here. It made its big debut this past weekend during the season finale for the ADAC GT Masters series at the legendary Hockenheimring – the on-again, off-again home of the German Grand Prix. Why in Germany, you ask? Because that's where Callaway Competition is based. The racing division got its start in Heilbronn as Woeher & Ciccone back in 1985. It joined with US-based Callaway Cars in 1988 to distribute its modified Corvettes in Europe, and branched out into constructing racing cars in 1994. And this is its latest project. Designed in partnership between Callaway Competition in Germany and Canadian designer Paul Deutschman, the new GT3-R replaces the previous C6-based Z06.R GT3. It packs a 6.2-liter V8 pumping 600 horsepower through an X-Trac six-speed sequential gearbox. And as you can see, it sure looks the part. Callaway will be offering the new GT3-R to privateer teams for entry in a variety of racing series around the world. But it'll also be fielding the example you see here, sponsored by Whelen Engineering that – like Callaway Cars – is based in Connecticut. Callaway Corvette C7 GT3-R World Debut at Hockenheim October 3, 2015 Hockenheim, Germany – October 3, 2015 – This weekend's ADAC GT Masters Season Finale was the backdrop for the unveiling of Callaway Competition's new Callaway Corvette C7 GT3-R. Following a brief presentation to media and invited guests, the successor of the C6-based Callaway Z06.R GT3 was displayed to the public for the first time on October 3, 2015 at the Hockenheimring in Germany. Constructors of GT race cars since 1990 and based in Leingarten Germany, Callaway Competition possesses a wealth of experience, technical know-how and a broad network of specialized professional partners. These elements were crucial to conduct such a large undertaking. After nearly two years of comprehensive planning, intensive development and expert fabrication of vehicle components, Callaway Competition completed the first C7 GT3-R just a few weeks ago. Its striking design comes as a result of the collaboration between Canadian designer Paul Deutschman and team owners Giovanni Ciccone and Ernst Wohr. Mike Gramke, Uwe Hoffmann, Florian Mohring and Andre Zanke were also heavily involved in the vehicle's development.