1966 Chevelle Convertible 396 Restored Ss Clone on 2040-cars

Auto blog

This is what a 2017 Chevy Camaro Z28 could look like

The latest Camaro Z28, the enthusiast darling of the somewhat frumpy fifth-generation pony car, only hit the scene in 2014. It housed the wonderful 7.0-liter, naturally-aspirated LS7 small block V8 and featured a ton of aero bits. The trickest pieces may have been the dynamic spool valve shocks, legitimately race tech for the road. So with the new Camaro out in the wild, we were wondering what a new Z28 might look like, and thus, commissioned these renders based on our best guesses as to what a future Z28 might be. Since Chevy didn't stray too far from the Zeta-chassis Camaro formula with its new Alpha-based car, our vision of a new 2017 Camaro Z28 likewise is a sequel rather than a reboot. The exterior styling and aero details are similar, but sleeker. The defining and protruding front splitter is back, but it's smoothed slightly and better integrated. It shares quad exhaust pipes with the lowlier SS, but they're of the beveled Z06 variety, and sized up to a howitzer caliber. Instead of a weak faux rear fender vent, our version gains a real brake cooling duct. Some iconic elements, like the hood extractor vent and the large decklid spoiler, remain. What we can't see, we have to speculate on. As the track-focused, hardcore pony car in the Camaro lineup, the Z28 will have to do battle with the Ford Shelby Mustang GT350R. There's simply no avoiding it. And whereas Ford distinguished that car with a 5.2-liter, 526-horsepower, flat-plane-crank V8, Chevy is likely to look to the parts bin to find motivation. This isn't a knock; the LS and LT-series small block V8s are both numerous and power-dense. And there's one engine that seems to do the trick: the LSA, last seen in the old CTS-V and still on sale in the Camaro ZL1 (and of course, still being produced as a crate engine). In ZL1 form, the LSA makes about 580 hp, which is a nice margin over the GT350R. It's also a high-zoot but not top-of-the-line mill, having been mostly superseded by the 650-hp LT4. That puts our probable Z28 far enough behind the new CTS-V and current Corvette Z06 in the pecking order to be a safe bet, without hobbling it with the LT1 shared with the Camaro SS and regular Corvette. Will those trick spool-valve shocks from Multimatic make it to the Z28 again? Ford is taking the GT350R very seriously, and if the expensive but supremely capable suspension system is required to manhandle the Shelby at the track, you can bet that Chevy will pony up for it.

Chevy dials up the razzle dazzle for Special Ops concept

Inspired by naval camouflage schemes used during the First World War, Chevy created the 2016 Silverado Special Ops concept, which is on display this week at the SEMA Show in Las Vegas. Based on the 1500 Z71, this Silverado wears a three-tone paint job that mixes different shades of blue, which Chevy says gives the concept visual depth. The appearance is a riff on early 20th Century color configurations used by the US and British navies. Called razzle dazzle, the look is meant to disguise ships' size, speed, and direction. On the Silverado, it simply adds character and gives the truck a more military bearing. The concept also gets flared wheel arches, a sport bar in the bed with LED lights, and a utility storage system. The grille is fitted with black accents and has a thin LED strip running across the top. Inside, orange is used for the door pulls and glove box handle, and the instrument panel and arm rests have more dazzle coloring. The truck also gets an upgraded exhaust kit, six-piston brakes, and a performance air intake. Chevrolet Introduces Silverado Special Ops Concept Military-inspired truck reinforces capability with go-anywhere style LAS VEGAS – Chevrolet's 2016 Silverado Special Ops concept imagines a unique rescue vehicle for special-operations forces. It is based on the Silverado 1500 Z71, which features a new front-end design and new technologies built into its strong, high-strength steel body structure and fully boxed frame, and draws its design inspiration from naval design aesthetics. "This Silverado concept is a multipurpose truck that reflects the go-anywhere, do-anything commitment of special-forces teams," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports. The naval-inspired camo appearance, called Razzle Dazzle, was developed more than 100 years ago to disguise a ship's speed, direction and profile to the enemy's eye. It is based on a three-tone blue exterior color, marked by a distinctive array of varying colored lines and shapes intended to mask the ship. "We created light, medium and darker shaded areas within camouflage bands flowing down the hood, body sides and tailgate," said Todd Parker, director of design, Chevrolet Accessories.

GM to invest $632 million in Indiana plant for future pickup truck production

General Motors plans to invest $632 million in its Fort Wayne, Indiana, assembly facility to prepare the plant for future internal combustion engine full-size light duty trucks, it said on Monday. The investment will be used to support new conveyors, tooling and equipment for the plant that manufactures GM's Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. GM has detailed more than $2.3 billion in planned investment in a series of announcements since last week as it works to retool existing North American auto plants and introduce more efficient next-generation internal-combustion full-size trucks and SUVs. Another investment announcement is planned later this week. The largest U.S. automaker is continuing to make big investments in gas-powered vehicles even as it vows to stop building them in 2035. Last week, GM said it was investing more than $500 million in its Arlington, Texas, assembly plant to prepare it for production of internal combustion engine full-size SUVs. GM faces increasingly stringent emissions requirements from California and the Environmental Protection Agency (EPA). Last week, GM also said it plans to invest more than $1 billion to re-tool two manufacturing sites in Flint, Michigan, to prepare for a new generation of its heavy-duty trucks. The Texas announcement highlights the company's commitment to continue "providing customers with a strong portfolio of (internal combustion) vehicles for years to come," GM said last week. On Tuesday, GM said it would invest C$280 million ($210 million) in its Canadian Oshawa Assembly to produce the next-generation internal combustion engine full-size trucks. GM paid $128.2 million in fines for failing to meet Corporate Average Fuel Economy (CAFE) program requirements for 2016 and 2017, records released recently show. The EPA in April proposed requiring a 56% reduction in projected fleet average emissions over 2026 requirements. (Reporting by David Sherpardson in Washington and Shivansh Tiwary in Bengaluru; Editing by Shilpi Majumdar and Conor Humphries) Plants/Manufacturing Chevrolet GM GMC