Caprice 1994 Lt1 on 2040-cars

Auto blog

Chevy Volt, Nissan Leaf go nearly the same all-electric miles a year

Range anxiety? What range anxiety? The concept is a foreign one to those driving Chevrolet Volt extended-range plug-ins, and as a result, that vehicle's all-electric driving miles are actually pretty close to that of the all-electric Nissan Leaf. Such were the findings of a study conducted by the Idaho National Laboratory (INL), which tracked about 8,700 cars during a three-year period, including a bunch of Volts, Leafs and Smart ED electric vehicles. In short, even though the Volt's all-electric range of about 38 miles is less than half that of the Leaf's, the Volts' collective all-electric driving was just six percent lower than the Leaf's (the next-generation Volt will be even more electro-generous, with a 50-mile range). The logic makes sense considering typical US driving habits, in which a vast majority of people commute less than 35 miles a day. Additionally, Volt drivers obviously have no fear of running out of electricity, so they were far more likely to max out on that range than some Leaf drivers. Overall, the average Leaf is driven about 15 percent less than the national average of about 11,300 miles a year for all vehicles, while Volts are driven about eight percent more. Of all those Volt miles, about 81 percent were in all-electric mode. Additionally, Volt drivers recharged about 1.5 times a day, while Leaf drivers recharged about once a day, and about 85 percent of that charging was at home. As for non-home charging, about 20 percent of the vehicles accounted for 75 percent of the station use, so folks are definitely creatures of habit. Check out the INL's 22-page report here for more interesting details. Related Video: Featured Gallery 2016 Chevrolet Volt: First Drive View 24 Photos Related Gallery 2016 Nissan Leaf View 30 Photos News Source: Idaho National Laboratory via Hybrid Cars Green Chevrolet Nissan Electric Hybrid extended-range plug-in

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.