Z28 Coupe 5.7l 2 Doors 275 Horsepower 4-wheel Abs Brakes 5.7 Liter V8 Engine on 2040-cars

Auto blog

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.

Buick Velite is a not-so-Volt-like plug-in hybrid concept for China

Is the Buick Velite a Volt by any other name? That's a question worth asking after General Motors said that the Buick Velite concept vehicle will make its global debut at the Guangzhou Auto Show later this month. GM says the car "will provide a template for upcoming models being launched under the Buick Blue new energy vehicle strategy." Whether that means the Velite is a variant of the second-generation of the Chevrolet Volt extended-range plug-in is open to interpretation. Some automotive publications, including Autoweek, are saying that's the case, but GM China doesn't mention the Volt in its press release, only saying that the car is a "high-performance" plug-in hybrid vehicle. As we know, GM doesn't use the "PHEV" descriptor for the Volt, which makes us thing the Velite's powertrain is more like the Cadillac CT6 PHEV. Either way, the concept was developed by the Pan Asia Technical Automotive Center (PATAC), which is a joint venture between GM and Shanghai-based SAIC. As far as the name, GM has been shopping the Velite moniker around for a while now. The automaker first used Buick Velite for the convertible concept vehicle it showed off at the 2004 New York Auto Show. More recently, GM in 2014 filed to use the name for the US variant of its Opel Cascada four-seat convertible model, which debuted in 2013. As for the second-generation version of the Volt, that model appears to be gaining favor in the US. Domestic sales of the Volt through October have surged 64 percent from a year earlier to more than 18,500 units. The new version boosted its all-electric range by 40 percent to 53 miles while increasing its power output by 20 percent. Related Video: News Source: General Motors via Autoweek, Automotive News-sub.req. Green Buick Chevrolet Electric Hybrid PHEV buick velite

Surprise! GM putting aluminum in next-gen pickups

Last month, General Motors launched a series of ads touting the benefits of steel over aluminum – specifically, with regard to the Chevy Silverado versus the Ford F-150. (Kind of. We're not sure what a grizzly bear has to do with anything.) We took issue with the ads, with editor in chief Mike Austin saying they "reek of insecurity, and distract from the Silverado's strengths that could be used for positive advertising." But what bothers us more, is that yet another report surfaced claiming anti-aluminum GM will indeed use the weight-saving material in its next-generation fullsize trucks. On Tuesday, GM announced a $877-million investment for its truck plant in Flint, MI. But Reuters says that huge overhaul is because the trucks will use "substantially different equipment than the tools GM uses today." The report specifically states, "People familiar with the company's plans say GM's next-generation pickups and SUVs will make use of various materials, including aluminum and lightweight steel, to shed weight and gain fuel efficiency to meet tougher federal standards." The Silverado already uses a few aluminum components in the engine and hood, and if more widespread use will help GM build its best fullsize trucks ever, then that's great. Honestly, we have no reason to doubt that aluminum will be used in the next Silverado and GMC Sierra. We just hope GM remembers that nothing is ever truly deleted from the bowels of the Internet when it launches the subsequent "look how great aluminum is!" campaign. Related Video: News Source: Reuters Green Plants/Manufacturing Chevrolet GM GMC Truck aluminum steel