1972 Chevrolet Camaro on 2040-cars
Somerset, Massachusetts, United States
This beautiful 1972 Z28 camaro is one of only 2,575 produced. 43K original miles, original matching numbers drive
train, PS, PB, M21 four-speed, original spare tire with jack assembly, original wheels with correct oval valve stem
openings, and was ordered without a console.
Car was built to be a keeper. Vehicle was completely disassembled. Sub-frame powder coated and
front end rebuilt-new bushings, tie rods, coil springs, brakes, and shocks. New heavy duty battery and cables.
Engine gaskets were changed and motor detailed. New water pump, starter, hoses, original carb rebuilt, all new
ignition parts, plugs, and wires. New radiator and hoses. New wiper motor. Heater box rebuilt with new blower. New
engine and under dash wiring harness. New clutch, pressure plate and throw-out bearing. Transmission and rear end
only required a fluid change-in excellent working order. Dash restored including new chrome air vents. New kick
panels. New door panels, headliner, seats rebuilt with new foam and black vinyl covers. New carpet. Original seats
belts. All new tinted glass and exterior moldings. New window frames, felts, rollers, and moldings. Quartz clock
and factory like am/fm/blue tooth radio. F60-15 Firestone Wide Oval bias ply tires. New 2.5 inch cross-flow with x
pipe exhaust system. New rear leaf springs, brakes, gas tank, gas lines, and shocks. Repainted Mulsanne blue with
white stripes. New weather-strips. New triple chrome bumpers, front grille, marker lights, tail lights, and rocker
moldings.
Chevrolet Camaro for Sale
1967 chevrolet camaro rsss(US $22,120.00)
1969 chevrolet camaro(US $16,800.00)
1969 chevrolet camaro z28(US $21,000.00)
1969 chevrolet camaro(US $19,600.00)
1969 chevrolet camaro(US $16,800.00)
1968 chevrolet camaro z28(US $19,600.00)
Auto Services in Massachusetts
Warwick Auto Body, Inc. ★★★★★
Trust Petroleum ★★★★★
Truck Guys ★★★★★
Toyota of Dartmouth ★★★★★
Thomas Ford ★★★★★
Sullivan Tire & Auto Svc Co ★★★★★
Auto blog
Ford GT dominates Le Mans qualifying, gets slapped with performance adjustment
Fri, Jun 17 2016Fifty years after Bruce McLaren and Chris Amon drove the Ford GT40 to victory at the 24 Hours of Le Mans, Ford is poised for a historic return to the Circuit de la Sarthe. The new Ford GT took the top two qualifying positions in the LMGTE Pro class, and four of the top five. Ferrari's 488 filled in the rest of the spots in the top seven, the first two from AF Corse. In other words, we're primed for a reboot of the classic Ford-Ferrari feud at this year's race. Or not, as the ACO, which organizes the 24 Hours of Le Mans, announced sweeping pre-race Balance of Performance (BOP) adjustments this morning that make this year's GT class anybody's race. In LMP1, last year's overall winner Porsche locked up the top two spots with the 919 Hybrid and will lead the entire field at race start. Toyota's two-car factory effort followed with qualifying times 1.004 and 2.170 seconds behind the pole lap. Audi rounds out the manufacturer-backed LMP1 class in fifth and sixth. Full qualifying results can be found here. The storyline for the GT cars is perfect - some say too perfect. Ford's class-leading times came after BOP adjustment to the Corvette Racing C7.R before qualifying. BOP is intended to level the playing field in the class by adjusting power, ballast, and fuel capacity. (Check out this explainer video for more, or even just if you love French accents.) But the process is riddled with unknowns and ripe for accusations of sandbagging. That is, if the Ford cars were intentionally slow in practice they could hope for BOP adjustment to improve their race chances. On the Corvette side, last year's GTE Pro winner went from the top of the field to the bottom, barely improving from practice to qualifying. If you think Le Mans is as rigged at the NBA Playoffs, well, it's not that simple. Because if Ford and Ferrari held back until qualifying - the eighth-place Porsche 911 RSR is three-and-a-half seconds off the class pole time - it was a pretty dumb strategy. This morning, the ACO tried to put things back in order by limiting the boost in the Ford GT's twin-turbo V6 and adding 11 pounds of ballast. Ferrari was also given extra weight but allowed more fuel capacity. The Corvette and Aston Martin teams were both given breaks on their air restrictors, which will allow their engines to make more power. Both Ford and Porsche also received extra fuel capacity.
Recharge Wrap-up: Free chargers for Canadian ELR buyers, Renovo gets funding for EV supercar
Thu, Sep 18 2014Chevrolet offers versions of its Express passenger van with B20 biodiesel and E85 capability. Customers can buy the van with the Duramax turbodiesel V8, which is compatible with the 20-percent biodiesel blend. There is also a FlexFuel V8, which can use the 85-percent ethanol gasoline blend. It's a great option for shuttling the whole soccer team to practice using renewable fuels. Read more at Domestic Fuels. Early buyers of the Cadillac ELR in Canada will get a 240-volt charger installed at their home for free. It should help convince some buyers to adopt the range extended luxury EV. Cadillac's Chief Marketing Officer Uwe Ellinghaus says, "Professional installation of the fastest home-charging unit is a natural way to mark the introduction of ELR to the luxury market." Read more in the press release below. Renovo has received venture capital funding from California-based True Ventures to build its Coupe electric supercar. The impressive EV, with its 500 horsepower and 1,000 pound-feet of torque, is an inspiring vehicle built by a promising company, according to its financial backers. Toni Schneider of True Ventures says that Renovo has "created incredibly advanced technology and a beautiful machine that is well positioned to disrupt the automotive market." Read more in the press release below. Renault says it will build its Fluence ZE electric car in China for an unnamed brand, pending government approval. Chief Executive Carlos Ghosn announced the plan at a test drive event in France on Monday. Renault has a partnership with Dongfeng Motors to build and sell its cars in China. Read more at Reuters. Germany has lifted its ban on Uber. While the German court believes the ride-hailing service is operating illegally without proper licensing for drivers, it says Taxi Deutschland waited too long to file the case against Uber. The taxi association plans to appeal the decision soon. See more in the video below, and read more at The New York Times. A new report from UC Davis claims that a global expansion of public transit could save 1,700 megatons of carbon dioxide yearly and over $100 trillion by 2050. A "high-shift scenario" would be necessary, wherein governments invest in rail and clean buses, expand biking and walking infrastructure and shift focus away from projects that encourage car use. This shift to public transit would especially be important in the US, China and India. Read more in the press release below.
Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy
Mon, Dec 23 2019A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars." First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: