1967 Chevrolet Camaro Ss Clone on 2040-cars
Fairmont, West Virginia, United States
Vehicle Title:Clear
Mileage: 0
Make: Chevrolet
Interior Color: Black
Model: Camaro
Number of Cylinders: 8
Trim: 1967 Camaro SS clone
Warranty: Vehicle does NOT have an existing warranty
Drive Type: Automatic
1967 Camaro, came factory as a 327, not a true SS. Car has a 350 with a some work done to it: Bored 40 over, Edelbrock intake and a 750 Holley carburetor and shaved heads, headers with cut aways. Transmission has a shift kit, Manual valve body and a 3500 stall convertor. 12 bolt posi-trac rear end with 4.56 ratio. Has been painted within the past few years, not bad from 10 feet away. Just shows the normal signs of driving. No power brakes, or power steering, but the power steering box is still on the car. I also have the pump to put back on it. I'm not saying its a 10 but its not junk either. All around not a bad car, just looking to sell this and find another project. Clear title in hand. Car is for sale locally and I reserve the right to end auction at any time. Also winner must pay with a certified bank check or cash before picking the car up. You buy it you're responsible for picking it up. Feel free to call me at (304) 677-7741 thanks again for looking.
Chevrolet Camaro for Sale
11 chevy 2lt convertible v6 heated leather hud paddle shifters 22" custom wheels(US $28,990.00)
2ss rs, navigation, hid's, sunroof, heads-up display, heated leather 8555n(US $39,995.00)
2010 chevrolet camaro ss coupe 2-door 6.2l(US $25,995.00)
1994 chevrolet camaro z28 coupe 2-door 5.7l(US $8,000.00)
Rs package, led's, pwr top, rear camera, park assist, remote start 8563n(US $33,995.00)
1970 camaro rs
Auto Services in West Virginia
White`s Custom Auto ★★★★★
Valley Alternators & Starters ★★★★★
Tri Star Motors ★★★★★
Sankbeil Tire Service ★★★★★
Napa Auto Parts - Genuine Parts Company ★★★★★
CITY WRECKER ★★★★★
Auto blog
GM Design shows what could have been and what might be
Thu, May 27 2021We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:
General Motors CEO Provides Few Details In Appearance Before Congress
Wed, Apr 2 2014It was only two months ago that Mary Barra, freshly crowned as the new General Motors chief executive officer, visited Washington DC as an esteemed guest of First Lady Michelle Obama for the State of the Union address. On Tuesday, Barra returned to the Capitol under more strained circumstances. For more than two contentious hours, she took questions from members of a House of Representatives subcommittee investigating General Motors years-long delay in initiating a recall of millions of vehicles that contained a defect that has killed at least 13 people. Why did GM accept faulty ignition switches that were below the company's set specfications? Why did GM learn about the problem in 2001 yet take no action until 2014? Will GM compensate victims' families even though the company's bankruptcy may limit its liability? Those were a few of the questions members of the House Oversight and Investigations Subcommittee asked. Few concrete answers were forthcoming. For her part, Barra sidestepped most of the questions, saying she wouldn't have information needed to answer them until an internal review is completed. David Friedman, the administrator of the National Highway Traffic Safety Administration, testified after Barra. The biggest news that emerged from the hearing was that General Motors has retained attorney Kenneth Feinberg to advise the company on its civil and legal responsibilities. He has made a career of resolving disputes and serving in a 'fixer' role, serving as the chief of the federal government's September 11th Victim Compensation Fund, as an administrator of compensation fund for victims of the BP Deepwater Horizon disaster and a similar fund for victims of the Boston Marathon bombing. Barra, who has been GM's CEO since January but been with the company since 1980, expects to meet with Feinberg on Friday, and have a concrete plan within the next 30-60 days. Yet Barra would not say for certain Tuesday that GM would compensate the victims at all. Despite repeated questions from Rep. Diana DeGette (D-Colo.), Barra did not outline the company's intentions. "I assume GM is hiring (Feinberg) to help identify the size of claims and then compensate the victims? Is that right," DeGette asked. "Is GM willing to put together some kind of a compensation fund for these victims that Mr. Feinberg will then administer?" "We've hired him to help assess the situation," Barra replied. "So really, there's no money involved at this point," DeGette asked.
GM plans new car family for global markets, $5B investment
Tue, Jul 28 2015Globalization remains all the rage in the auto industry, as manufacturers scramble to develop single vehicles that can easily be adapted to the world's disparate market places. Ford has been a champion of this movement, with its One Ford mandate, but now, its cross-town rival is getting in on the action, albeit on a smaller scale. General Motors has announced a $5-billion investment to develop a new Chevrolet-badged family vehicle for global growth markets, including Brazil, Mexico, India, and importantly, China. With the PRC listed as a target market for the new vehicle, it's no surprise that GM is teaming with its Chinese joint-venture partner, SAIC Motor, to develop the vehicle's architecture and engines. The first vehicles should be hitting dealers by 2019, with GM expecting to eventually move some two million units per year. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," GM President Dan Ammann said in the attached statement. "Strengthening Chevrolet's position through this major investment is consistent with our global strategy to ensure long-term profitable growth in the markets where we operate." GM is quite focused on developing markets for a new vehicle, going as far as to say that "mature markets" like the US aren't currently being considered for the new family vehicle. As for where it will be built, the press release specifically says it won't be exported to the US, meaning it will very likely be built abroad using parts from local suppliers. Read on for the official press release from General Motors. Chevrolet Strengthens Position in Growth Markets with $5 Billion Investment 2015-07-28 All-new vehicle family tailored to local customer requirements General Motors and SAIC Motor partnership further enhanced DETROIT – Chevrolet announced today it is investing $5 billion to strengthen its business in global growth markets through the development of an all-new vehicle family that will meet the rapidly changing demands of customers in these markets. "With a significant majority of anticipated automotive industry growth in 2015 to 2030 outside of mature markets, Chevrolet is taking steps to capitalize on that growth," said General Motors President Dan Ammann.








