1967 Chevrolet Camaro 502 Big Block, Cold Ac on 2040-cars

Auto blog

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

2016 Chevy Volt rated at 106 MPGe, 53 miles of pure EV range

Following a string of rumors, Chevrolet and the Environmental Protection Agency have released official fuel economy numbers for the second-generation Volt. As was reported earlier today, the new and improved hybrid will cover 53 miles on pure electric power. As Chevy tells it, first-gen Volt owners cover about 80 percent of their mileage on EV power alone, so the 40-percent increase from the second-gen should lead to an even bigger reduction in gas-powered Volt mileage. Chevy expects some 90 percent of mileage to come from a plug with its new 2016 model. This newfound EV range comes thanks to the 2016 Volt's 18.4-kilowatt hour lithium-ion battery. Rated at 106 MPGe by the feds – exactly what was promised by a June leak – the 2016 Volt improves nicely on the current model's 17.1-kWh, 98-MPGe battery back. There's also a marked improvement when relying on the gas-powered on-board generator. The 1.5-liter, four-cylinder engine will happily run on regular fuel and return a still-impressive 42 miles per gallon combined rating once the battery's state of charge is depleted. Expect the freeway to cruise to be even better, although Chevy isn't ready to say by how much. Fully charged and with a full tank, drivers should expect to cover 420 miles, a 40-mile improvement over the current model. Scroll down for the official press release from Chevrolet Related Video: The Results Are In: More Range for the 2016 Volt EPA-estimated pure electric range is 53 miles DETROIT – The 2016 Volt is engineered to offer customers more of what they want: range, range and more range. The Volt's all-new second-generation Voltec extended range electric propulsion system delivers 53 miles of pure EV range, based on EPA testing. That is nearly a 40-percent improvement over the first generation Volt. Chevrolet expects many next-generation Volt owners will use power solely from their battery for more than 90 percent of trips. Today, Volt owners use battery power on 80 percent of their trips. This means that the average Volt owner may expect to travel well over 1,000 miles between gas fill ups, if they charge regularly. For the first 53 miles, the Volt can drive gas and tailpipe-emissions free using a full charge of electricity stored in its new 18.4-kWh lithium-ion battery, which is rated at a combined 106 MPGe, or gasoline equivalent. When the Volt's battery runs low, a gas-powered generator seamlessly operates to extend the driving range for a total of 420 miles on a full tank.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.