1984 Chevy K2500 4wd $1,200 on 2040-cars
Brandon, Vermont, United States
For Sale By:Private Seller
Engine:305 V8
Drive Type: 4WD
Make: Chevrolet
Mileage: 120,000
Model: C/K Pickup 2500
Trim: 0
Number of Doors: 2
1984 3/4 Ton Chevy K2500 4WD 4 spd transmission,Cab needs body work,have extra parts. Also have inner fender well and fender(New). Vin #-2GCEK14H0E1116574 Trailer not included. No title as title not needed in St. of VT-- Stalled project,lost interest. $1,200 as is. Any questions call Roger @ (802)273-3653(H) or (802)779-8001(C)
Chevrolet C/K Pickup 2500 for Sale
1977 gmc c/k 2500 crew cab in california
1973 chevrolet pickup 4x4(US $12,000.00)
1970 ~ 3/4 ton ~ 4-wheel drive ~ dually ~chevy with utility box 5220 orig miles
Hard to find 98 chevy 2500 turbo diesel xcab only 135k low low price
1983 chevolet k20 4x4 long bed super clean no rust lots of extras
1972 chevy c-20 402 big block truck
Auto Services in Vermont
New England Automotive ★★★★★
Mountain Glass & Lock Corp ★★★★★
Manchester Auto Body ★★★★★
Direct Auto Body ★★★★★
Countryside Glass Corporation ★★★★★
Caron`s Collision Center ★★★★★
Auto blog
GM Design shows what could have been and what might be
Thu, May 27 2021We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient. View this post on Instagram A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version. View this post on Instagram A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:
2016 Chevy Malibu gets premium looks, hybrid model
Wed, Apr 1 2015The Chevrolet Malibu was once an automotive icon, but its modern reputation is one for underachievement. A new 2016 model seeks to restore the storied nameplate with improved styling, more interior room and a new hybrid version. It debuts Wednesday at the New York Auto Show. Put simply, "the goal was to put Chevrolet back in the midsize car segment," said John Cafaro, the brand's executive director of car design. In a crowded arena with 2.2 million sales up for grabs annually, Chevy has not been a player. Last year, the brand sold 188,519 Malibus, a six-percent decline from 2013, and fewer than half the number of Toyota Camrys and Honda Accords sold. Despite awards from J.D. Power and Associates and the Insurance Institute for Highway Safety, Chevy knew the Malibu needed a big change. New Skin, Lighter Bones The redesign has been in the works for at least three years. Although the Malibu is still based on GM's Epsilon 2 platform, the underpinnings are more derivative of the Impala than the outgoing model. The body structure makes greater use of high-strength steel, which helps reduce weight by 300 pounds. Size is more Impala-like as well, with 2.3 inches more overall length and a 3.6-inch wheelbase stretch contributing to greater interior space. A new skin covers the Malibu's lighter bones, and design language from the Impala gives its sibling sedan a fresher, more upscale appearance. To execute this premium appearance, Chevy turned to 25-year-old designer Jaymer Starbody, a four-year General Motors veteran and graduate from Detroit's College for Creative Studies. He described the new Malibu as having a "wheel-oriented" design, and the car looks poised to pounce from certain angles. Though the 2016 Malibu is the same width as before, designers stretched the creases and angles in the sheetmetal to create a flatter, sleeker appearance. The hood and cowl are lower, and the Malibu's face sparkles with LED running lamps on the top trim levels. Inside, the roomier cabin has a new center stack, satin chrome accents on the interior panel and a console storage area designed for mobile devices. Chevy MyLink with a seven-inch color touchscreen is standard on lower trims, and the top model upgrades to an eight-inch screen. Perforated leather seats and ambient lighting are also available options. The cabin was designed to look high-tech, but still remain easy to use, according to Chevy interior design director Crystal Windham.
Chevrolet considering midsize crossover to slot between Traverse and Equinox
Mon, Jan 9 2017Crossovers are the new hotness, and automakers are looking to cash in by offering a size and shape for every customer. With Chevrolet's debut of the new 2018 Traverse in Detroit, which grew ever so slightly compared to the first-generation model, there is now a midsize-crossover-sized hole between the three-row Traverse and the compact Equinox. When asked about that obvious space, a Chevrolet spokesperson told us the company is looking into the possibility of expanding its crossover lineup. It should be a relatively simple thing to do, since all it would take is reskinning and rechristening the GMC Acadia with a bow tie, and we all know how much GM loves platform sharing. Although they're now different sizes, the new Acadia and Traverse still use the same platform; the Acadia is now on a short-wheelbase version of the C1XX while the Traverse uses long-wheelbase C1XX parts. A short-wheelbase Chevy built on the C1XX likely would be differentiated visually from both the Acadia and the larger Traverse. It may seem like flooding the lineup with more and more models would cannibalize sales of existing ones, but Chevrolet said it would rather have customers stay within the brand rather than going to another automaker. There have been whispers that some form of the Blazer name (possibly TrailBlazer) may make a return on a midsizer, but if it does don't expect an old-school body-on-frame SUV like the old one. In the end, if Chevy builds it, customers will come. Related Video:



