1973 Chevrolet C-10 on 2040-cars

Auto blog

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

New Chevy Small Block crate engine has 405 hp, endless possibilities

With decades of history, the Chevrolet Small Block V8 has definitely stood the test of time, and the company has kept finding ways to make it better. At this year's SEMA Show in November, Chevy Performance is unveiling the latest upgrade to that legacy with the new ZZ6 350-cubic-inch (5.7-liter) crate engine. Offering 405 horsepower and 405 pound-feet of torque, the mill should add a big dose of power to any project car. For the ZZ6, Chevy is working to improve the Small Block's high-rpm performance. To make that happen, the engine has Fast Burn aluminum cylinder heads and an updated valvetrain inspired by the LS family of powerplants. Large intake runners help with the airflow, and the valve springs use a tapered design that allows for less reciprocating mass. The mill also packs a forged steel crankshaft and high-silicon aluminum pistons inside of a cast iron block. Chevy is offering the engine in two versions depending on what the builder needs. The Base configuration comes with an intake, distributor, water pump, and a few other parts but lacks carburetor and accessories. Conversely, the Turn Key option has everything, including the carb, air cleaner, starter, alternator, and more. More details about their availability will be announced at SEMA. NEW ZZ6 CHEVY SMALL BLOCK ADVANCES CRATE ENGINE LEGACY Revised Fast Burn heads with LS-inspired valvetrain enhance high-rpm performance 2015-10-02 DETROIT – Developed with contemporary technologies, including a high-rpm valvetrain, Chevrolet Performance's new ZZ6 crate engine offers builders a modern twist on the classic Chevy Small Block 350. It uses updated Fast Burn cylinder heads with beehive-style valve springs inspired by the LS engine family – a feature that enhances high-rpm capability, enabling the new high-performance engine to achieve 405 horsepower and 405 lb-ft of torque. That's more power than any factory produced 350 engine ever installed in a Chevrolet production vehicle and it's one of the most powerful 350 Small Block-based crate engines in the nearly 27-year history of the "ZZ" lineup. "The new ZZ6 is the ultimate ZZ 350-based crate engine from Chevrolet Performance," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports.

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.