Find or Sell Used Cars, Trucks, and SUVs in USA

1971 Chevrolet Custom C10 Short Bed Chevy C-10 Swb on 2040-cars

Year:1971 Mileage:90700 Color: and all black interior
Location:

Monmouth, Illinois, United States

Monmouth, Illinois, United States
Advertising:

  • 1971 Chevrolet Custom 10 with two tone exterior and all black interior. This truck drives just as good as any new truck. This classic truck needs nothing but an owner to buy it and drive it!
  •          350-CID small block V8, rebuilt 8000 miles ago. 90k miles on the body.
  •          HEI electronic ignition conversion
  •          Mild Cam with Eldelbrock intake, 4 barrel carb, valve covers & air cleaner
  •          New fuel sending unit
  •          Three-speed manual  transmission
  •          New Belltech suspension
  •          Wilwood power disc brake conversion, front and rear.
  •          New 20-inch boss wheels (staggered) with new tires (less than 1000 miles)
  •          New interior
  •          New body mounts and bushings through-out   
  •          Body is in great shape, 3rd owner  rust free southern truck
  •          Please call Zach with any questions at 309-337-8280.
  •          Please see link below for a YouTube video.

·         https://www.youtube.com/watch?v=pnVBwAwkOH4&list=UUkcHorv_gQ0OUweToboBWTg


P     Please note... This truck is being sold-as-is with no warranties. No full payment, no truck. Thanks and good luck! 

Auto Services in Illinois

Wolf and Cermak Auto ★★★★★

Auto Repair & Service
Address: 2160 S Wolf Rd, Western-Springs
Phone: (708) 202-6600

Wheels Of Chicagoland ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 1864 Techny Ct, Northfield
Phone: (847) 205-0420

Urban Tanks Custom Vehicle Out ★★★★★

Automobile Body Repairing & Painting, Automobile Parts & Supplies, Automobile Customizing
Address: 436 E Lincoln Hwy, Dekalb
Phone: (815) 754-9000

Towing Solutions ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Towing
Address: Industry
Phone: (217) 222-5960

Top Coverage Ltd ★★★★★

Automobile Parts & Supplies, Automobile Accessories, Windshield Repair
Address: 963 E Chicago St, Inverness
Phone: (847) 697-2090

Supreme Automotive & Trans ★★★★★

Auto Repair & Service, Automobile Repairing & Service-Equipment & Supplies
Address: 1341 S Spencer St, Aurora
Phone: (630) 231-4444

Auto blog

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

Wed, Jul 8 2015

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

Our favorite mid-engine Corvette theories and rumors

Tue, Sep 13 2016

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

GM drops diesel engines for 2020 Chevy Equinox and GMC Terrain crossovers

Fri, Jul 12 2019

GM is officially discontinuing the diesel engine in the Chevy Equinox and GMC Terrain for the 2020 model year. The 1.6-liter turbodiesel was always an oddball of an engine in the compact crossover segment, and now the experiment has come to an end. The Car Connection initially reported the news, and a GMC spokesperson, Stuart Fowle, confirmed it to us this morning.  “A huge majority of our Terrain customers have opted for one of our two gas engines," says Fowle. We canÂ’t say this eventuality comes as a massive surprise, as we saw news from couple of months ago that GM was dropping all-wheel drive from the diesel-powered cars for 2020. Low demand was cited as the reason for that cull, and itÂ’s the same for the little GM crossovers this time around, too. These vehicles were the only ones powered with a diesel engine in their class, but thatÂ’s going to be changing. Just as GM is going away from the diesel, Mazda is finally bringing its diesel to market in the CX-5. YouÂ’ll only be able to get that engine in the most expensive ($42,045) trim level, combined with all-wheel drive, though. The cheapest Equinox diesel starts at a comparably low $30,795. ThatÂ’s a $2,400 upcharge over the base 1.5-liter turbo four-cylinder, and the value is questionable. Mileage is better, but diesel fuel is more expensive. Towing capability didnÂ’t increase over the base engineÂ’s 1,500-pound capacity, but the extra torque around town was nice. As diesels go in the U.S., this one was rather rough and noisy, possibly contributing to some turning their noses up after a test drive. Perhaps another reason for its demise was that the much quicker 2.0-liter turbo Equinox was only $100 more than the diesel. This engine offered significantly better towing at 3,500 pounds, too. You can read all about what we thought of the diesel in our first drive review here, but the 2019 model year is the last one if you had it on your shortlist. This article has been updated to indicate the source.