1967 Chevy C10 Custom Built Pro Touring Style on 2040-cars
Georgetown, Texas, United States
Body Type:Pickup Truck
Engine:V8
Vehicle Title:Clear
For Sale By:owner
Exterior Color: Benchmark Blue
Make: Chevrolet
Interior Color: Blue
Model: C-10
Trim: custom
Drive Type: auto
Mileage: 450
I am the owner and builder of this frame off custom built truck. I spent six years building this truck. It is bagged with Ridetech equipment with a triangulated rear 4-link. The front crossmember is out of an 84 Chevy. It has a 350/700r4 combination with a Chevy 12 bolt Eaton posi with 3.73's. Cooling is thru a custom built aluminum radiator with dual Spal fans. Heat comes from a Crane cammed Heddman header,Edelbrock 1406,Wieand intaked built chevy 350 with 3" exhaust. This motor is fed from a custom built 24 gal one off aluminum fuel tank. Stopping is controlled by four wheel disc brakes. This is all monitored with a Classic instruments cluster thru Autometer gauges. These gauges are behind a Billet specialties steering wheel set on a Ididit column. The dash has been shaved and the door panels are custom.
Chevrolet C-10 for Sale
1971 chevy chevrolet custom c/10 truck pickup *cold air, cruise, fuel injection*
1979 chevrolet c-10 stepside shortbed pickup 48,006 actual miles !
1965 chevrolet c10 stepside truck
1969 chevrolet c-10 pick up/ video/ protecto plate / custom
1967 chevrolet c-10 half ton pick-up, long bed, restored, modified
1970 chevrolet c10 pickup rebuilt 350 v8/350 fresh black paint short bed(US $14,500.00)
Auto Services in Texas
Wynn`s Automotive Service ★★★★★
Westside Trim & Glass ★★★★★
Wash Me Car Salon ★★★★★
Vernon & Fletcher Automotive ★★★★★
Vehicle Inspections By Mogo ★★★★★
Two Brothers Auto Body ★★★★★
Auto blog
GM ending stop-sale order on heavy-duty trucks
Tue, Apr 26 2022General Motors responded to an inquiry from Autoblog regarding a stop-sale order on its full-size heavy-duty pickup trucks. Here's GM's official statement. GM is committed to building the highest quality products possible. We paused delivery on a small number of HD pickups with the 6.6 liter Duramax engine last week to finalize an investigation into a potential quality issue. The investigation has been completed and the stop sale will be lifted for the small number of vehicles at dealerships.Customers can be assured GM’s heavy duty pickups are covered by a 5 year/100,000 mile powertrain warranty. The original article continues below. General Motors has reportedly sent its Chevrolet and GMC dealers a stop-sale order that applies to some examples of the 2022 Silverado HD, the 2022 Silverado MD, and the 2022 Sierra HD. The units affected by the stop-sale order may develop an engine-related problem. Citing anonymous sources, website GM Authority wrote that the Duramax 6.6-liter turbodiesel V8 in the affected trucks can hydrolock, which means liquid could enter the cylinders and cause a substantial amount of damage. The report does not specify where the liquid would come from; hydrolocking can happen by driving through a deep puddle of water, for example, but a large amount of coolant can cause it as well. The publication adds that the stop-sale order was assigned internal reference number N222362910. It also notes that the trucks included in it can't be sold, delivered to buyers, traded with another dealer, sent to auction, or even used for demonstration purposes until further notice. Earlier in April 2022, GM Authority reported that General Motors planned to buy back an unspecified number of Silverado HD and Sierra HD trucks due to quality-related issues with the 6.6-liter V8. Details about the problems experienced by customers haven't been released; all we know is that each truck will be replaced, though the replacement may not have the same equipment due to the ongoing chip shortage. Related video:
2016 Chevy Volt auctioned off to help the robots
Tue, Nov 10 2015One of the cool things about the 2016 Chevrolet Volt extended-range plug-in being auctioned off to raise money for kids' science and robotics program is that even the sedan's color sounds very scientific. Indeed, it's fitting that a "Kinetic Blue" Volt will be used to advance the scientific education of the country's students, according to Hybrid Cars. That is, if it fetches enough cash. Chevrolet parent General Motors was kind enough to donate a 2016 Volt to the so-called FIRST K-12 robotics program (FIRST stands for For Inspiration and Recognition of Science and Technology). The program was founded in 1989. Last year, General Motors engineers worked with about 10,000 FIRST students in the US, but it looks like GM is now going the cold-hard-cash route to make its mark on future scientists. Bidding for the vehicle will take place until the morning of November 19, and, hopefully, it will generate enough interest to drive the bidding price up beyond its MSRP. As of Tuesday morning, nine bids had been taken, with the top one at $27,750. That's all fine and good except the car is pretty loaded with bells and whistles, and it's 53-mile electric-only range is a considerable jump from the first-generation Volt, so the car's "estimated value" is $40,245 (not factoring in the $7,500 federal tax incentive). That's a pretty good jump over the 2016 Volt's base price of $33,995, which marked a $175 price cut from the 2015 model. So pony up, folks. It's for the kids. Related Video:
GM to build outgoing Silverado and Sierra until late 2019
Tue, Nov 6 2018As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video:



