1972 Chevy Blazer - Excellent! on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Weekly Recap: Electric Rapide concept showcases Aston's future

Aston Martin showed off an all-electric Rapide S prototype this week and announced an agreement with investment firm ChinaEquity to explore development of a production version of the sports sedan. The car could arrive in about two years if the project advances, and it would be built in Gaydon, England. The concept car, called the "RapidE" was developed with Williams Advanced Engineering. The electric Rapide is meant to highlight British innovation, and it was revealed during a state visit by Chinese president Xi Jinping to the United Kingdom. Spec were not available for the concept on display. "The car we showed in London is a fully running concept but not yet defining [of] our choice of battery, motor, inverter, etc," spokesman Simon Sproule said. "Now that we have a clearer path for producing the car, we will be defining all the parameters." Aston Martin has been vocal about its electric ambitions this year, and Sproule told us at the New York Auto Show that an all-electric Rapide could cost $200,000 to $250,000 or more. "It's a study, but we're serious about it," he said. Some reports have indicated the electric Rapide could pack as much as 1,000 horsepower. Aston considers electric technology the strongest play for modernizing its powertrains and meeting emissions standards around the world. Hybrids and all-electric models can offer high outputs and strong torque delivery, which is in keeping with the Aston's image as a sportscar maker. Company brass prefer this option over dropping down to four-cylinder engines. And yes, V8s and V12s remain part of the plan. The electric push is part of Aston's future strategy to remake its lineup, which includes refreshing its sportscars, building a production version of the electric all-wheel-drive DBX concept shown at the Geneva Motor Show, and adding a four-door Lagonda. OTHER NEWS & NOTES Domino's serves up purpose-built delivery car Domino's revealed a purpose-built pizza delivery car based on the Chevy Spark. It's called the DXP, for Delivery Expert, and it can handle up to 80 pizzas. The pies stay warm thanks to an oven located behind the driver's seat, and the DXP is sauced up with a puddle-lighting feature that projects the Domino's logo outside of the car. Power comes from the Spark's stock 1.2-liter four-cylinder engine rated at 84 hp that gets up to 39 mpg on the highway. Chevy dealers will be trained to service the DXP.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.