Repairable Rebuildable Salvage Wrecked Runs Drives Ez Project Needs Fix Low Mile on 2040-cars

Auto blog

2020 Chevy Silverado, GMC Sierra recalled due to faulty brake component

General Motors is recalling 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups to fix a defect in the trucks' brake system. Certain Silverado and Sierra pickups were produced with brake-caliper bolts that were not heat-treated. Without heat-treating, the bolts are weaker than they should be, and there is a risk that they could fail, which would affect the trucks' braking performance, possibly leading to a crash. In total, 20,352 vehicles are affected. Owners of affected trucks will be contacted by GM. Dealers will inspect the bolts and replace those that are defective. Related Video:      

Mopar Hellephant is sold out, but here are 4 other awesome crate V8s to try

Despite a relatively enormous $30,000 price tag, Mopar's 1,000-horsepower supercharged Hellephant crate engine sold out in just 48 hours. Some enthusiasts may have missed out on the crazy engine due to lack of funds, or they just assumed there would still be some Hellephants down the line. But worry not, swap-happy gearheads. There are plenty of V8s in the world to pick from, and we highlighted four favorites. They're not as powerful, but they're all cheaper, and still have a lot to offer. Mopar 6.2L Hellcrate Odds are a lot of prospective Hellephant buyers were Mopar fans to begin with, so we'll start the list with the next-most-potent offering: the Hellcrate. This is the same supercharged 6.2-liter V8 found under the hood of the Dodge Charger and Challenger Hellcats and the Grand Cherokee Trackhawk. It makes 707 horsepower and 650 pound-feet of torque like those cars, too. It's also about $10,000 cheaper than the Hellephant engine at $20,020, and that leftover money can be used to finish the project or for aftermarket upgrades to get it closer to the Hellephant's output. GM LS9 6.2L The Hellcrate isn't the only factory supercharged crate engine on the market. From General Motors comes the supercharged 6.2-liter LS9 V8. This is the engine that was used in the C6 Corvette ZR1. At 638 horsepower and 604 pound-feet of torque, it doesn't make as much power or torque as the Hellcrate. But it does boast a dry sump oil system. So instead of pumping oil out of a pan at the bottom, the engine uses an oil tank mounted remotely that pumps oil into the engine. This means the engine is shorter overall, and can be mounted lower for a better center of gravity. It also means that there's almost no risk of running the engine dry in hard cornering, as could happen with a normal oil sump where the oil can slosh to the side without the oil pump. Basically, it offers some major benefits if you want supercharged V8 power for a road course car. It's also a tad cheaper than the Hellcrate at $18,149. But get one while you can, because GM is only selling what's left from when it was building the C6 ZR1. Ford Aluminator 5.2XS Our pick from the Blue Oval lacks a supercharger, but it's still pretty sweet.

GM marks 500 million vehicles

General Motors is marking a major global milestone, as 500 million vehicles have rolled off its assembly lines since the company's founding in 1908. To mark the occasion, the automaker is continuing to invest in production and offering a one-time discount to some customers. GM North America boss Alan Batey used the festivities to announce the Fairfax Assembly factory in Kansas as one of the sites earmarked for the company's $5.4 billion in upcoming investments. The plant will get $174 million of that money for new equipment and technology to build the 2016 Chevrolet Malibu. Among the upgrades will be a shake-and-rattle booth that will simulate road conditions to find squeaks. To commemorate both the production milestone and the Fairfax plant, Batey and company CEO Mary Barra also gave away a 2016 Malibu to a wounded Iraqi war veteran, and the two execs announced that in the third week in May all GM employees can share a one-time customer appreciation discount with friends to help get them into the automaker's products. Barra also gave a speech to the workers there about some of the other milestone's in the company's history, which you can read below. Innovation on the Line: GM Manufacturing Milestones Many of General Motors' most important innovations have occurred behind the scenes, in its manufacturing facilities. Concepts such as changeover, flexible assembly, automation, computer simulation, machine vision and robotics were developed at GM. Over the decades these innovations have helped enable improvements in vehicle quality, efficiency and competitiveness. 1901: Ransom Olds' famous Curved Dash Oldsmobile, designed with simplicity, reliability and value in mind, was the first American car built in a factory designed specifically for automobiles and in standardized volume production. GM acquired Oldsmobile in 1908. 1908: Cadillac wins the Dewar Trophy, Europe's most prestigious award for precision and excellence in manufacturing, by demonstrating the auto industry's highest standards for precision and interchangeability of parts by disassembling three Cadillacs and mixing the parts randomly before reassembling and driving them before a contingent of judges. 1922: GM hires William Knudsen to lead Chevrolet's turnaround. Knudsen implements flexible mass production, which helps Chevrolet incorporate annual styling changes and take market share from Ford.