Ltz,black Leather on 2040-cars

Auto blog

GM under fire from safety advocates over braking problem caused by recall fix

Safety experts are lambasting General Motors over what they say is the automaker’s slow notification of owners of certain 2019 sedans and trucks that a recall fix could cause power braking to fail and increase the risk of a crash, the Detroit Free Press reports.  GMÂ’s original recall in December targeted about 550,000 Cadillac CT6 sedans and Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, all from the 2019 model year, over potentially defective electronic stability control and antilock brakes. In that case, GM said the errors would not show up as a diagnostic warning on the instrument cluster. But after GM had done recall work on 162,000 vehicles, about 1,700 owner have complained that their power brakes didnÂ’t work after they had the recall done and then used the OnStar app to start their vehicle. GM then issued a supplemental fix for customers whoÂ’d already had their vehicles serviced. In this case, a diagnostic warning should illuminate saying either “Service Brake Assist” or “Service ECS,” which GM says is a signal that a customer should not drive the vehicle and instead call their dealer, which will tow the vehicle and have it repaired. Safety advocates say the automaker hasnÂ’t gone far enough to protect customers. “The fact that you could potentially start a vehicle and not have brakes is a pretty risky proposition,” Sean Kane, president of the Safety Research and Strategies, which works on auto issues for plaintiffs and governmental organizations, told the Freep. “The fact that they wouldnÂ’t notify owners (sooner) is pretty stunning.” GM told the Freep it was required to notify the National Highway Traffic Safety Administration and file paperwork before it notified customers about the original recall, which was made Dec. 12. It then had to investigate and resolve the problem created by its original recall fix before alerting customers. GMÂ’s call center and dealers are contacting the remaining 900 customers who havenÂ’t yet had the update made to the original recall repair. GM also hired a vendor to send recall letters to the 550,000 customers affected by the original recall notifying them about the update. There are no known injuries or deaths related to the problem. Read the Freep story here.

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck