Chevy Astro Cargo Van on 2040-cars

Auto blog

Best new convertibles for 2024 and 2025

If you’re here, then youÂ’re already in the right mindset. Convertibles rule, and we have all the best convertibles listed for you further below. Driving around with the top off is an experience you need to live to fall in love with. When the weatherÂ’s right, youÂ’re on a proper bit of road, and the car youÂ’re in is a good one, few automotive experiences can top it. The experience is extra special when you have a musical exhaust note filtering directly into your ears and echoing off the landscape around you. And while rolling the windows down and opening a moonroof can get you part of the way there, it's nothing like feeling the wind wash over you with absolutely no roof overhead. The downsides can be just as harsh as the upsides when youÂ’re in the wrong conditions, though. Convertibles are typically worse to live with in cold climates, and driving around with the top up frequently means you might be subject to more road noise and worse visibility than an equivalent coupe. And when it comes to pure performance, convertibles are inherently compromised from a weight and structural rigidity perspective. All that said, we still think the upsides outweigh the compromises if your number one objective is to simply have fun. ItÂ’s a good thing then that there are a ton of great convertibles for sale these days. And no, the list of possibilities isnÂ’t as long as it used to be. Long-running standbys like the Mercedes-Benz E-Class and C-Class Convertibles are gone (replaced by the one CLE-Class). And so are others like the Audi TT Roadster, Fiat 124 Spider and Nissan Z Roadster. Nevertheless, opportunities abound from the ultra-cheap and fun, to physics-defying supercars and everything else in between. WeÂ’ll give you options for which new convertibles we think are the best below, so read on to find out.   Mazda MX-5 Miata Pros: Lightweight and compact; great engine and transmission combo; one of the most raw and pure driving experiences out thereCons: Not great for tall people; infotainment is dated; tiny trunk Read our Mazda MX-5 Miata Review Miata is always the answer, right? In this case, that rings even more true than usual. In fact, you could stop reading this list right here and go buy a Miata and youÂ’d likely be just as happy driving it around as you would be in any of the more expensive offerings that follow. ThatÂ’s just the magic of the MX-5.

Best cars for snow and ice in 2023 and 2024

What's the best car for snow? The real answer is "the one with winter tires." What do we mean by that? You could have the finest, most advanced all-wheel-drive system or four-wheel drive in the world, but if you're running all-seasons (the spork of tires), your fancy four-wheeler won't matter much. The odds are, any vehicle on the road running good winter tires will probably perform adequately in slippery, slushy and/or snowy road conditions. (Here's a more complete explanation of why winter tires are totally worth it). In other words, you don't really need any of the cars on this list. With a set of winter tires, countless others will do the job, and even these will be at their best with proper rubber. You can find a variety of winter tires for your car here at Tire Rack. Keep in mind that you will need a full set of four snow tires for safety and performance, no matter what you're driving. The days of your dad putting just two snows on the family truckster to get it moving in a straight line are long gone. Don't get us wrong, getting a car that performs well in snow and ice is still a worthy criteria for car buyers. According to the U.S. Transportation Department, 70% of Americans live in places that get snow and ice. And much of the country has been blasted with arctic air for much of the new year. So let's look at the cars. First, we're highlighting choices for a variety of buyers and price points. Second, we're not just considering snow; we're considering general wintery conditions people will experience driving to work or school. As such, these are all choices with advanced all-wheel-drive systems, usually with "torque-vectoring" systems that not only automatically shunt power front and back, but side to side between the rear axles. Most have extra ground clearance for getting through deep snow, and we prefer those vehicles with more responsive steering, throttles and transmissions that provide a greater sense of vehicle control in slippery conditions.    Acura RDX Read our Acura RDX Review Acura's Super-Handling All-Wheel Drive system was one of the first to offer torque-vectoring, and besides often being touted for its ability to greatly enhanced dry-road handling, its benefits in the slick stuff can be profound. It's actually surprising that Acura hasn't leaned into this capability further by offering more rugged versions of its vehicles.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck