Chevrolet Astro Mini Cargo Van Gas 4.3l Engine A/t A/c Bidadoo on 2040-cars

Auto blog

2022 Chevrolet Silverado and GMC Sierra now cost more, again

GM Authority put Chevrolet and GMC pickup truck prices under the microscope, spying the same macroscopic issues none of us can avoid seeing: Price increases. The 2022 Chevy Silverado 1500 and 2022 GMC Sierra 1500 have been hit with their third price increases this year. The Heavy Duty versions of those same trucks have been given their fourth price increases this year. Starting with the light-duty options, they've been rung up for another $900 across the board, which breaks down to $800 added to the MSRP and $100 added to the destination charge. The mandatory cost for shipping a truck from the factory to the dealer is now $1,795. That destination fee is now more than 5% of the purchase price of the least expensive 2022 Silverado, the Regular Cab Work Truck trim with a Standard Bed and 2.7-liter turbocharged four-cylinder retailing for $36,395 after destination. And that price is $3,200 more than the initial list price from last December. At the other end, the Silverado ZR2 is up $3,400. Average that out, and the Silverado's MSRP has gone up by nearly $700 every month since initial pricing came out. On the GMC side, the bidding starts at $37,195 for the Regular Cab Pro trim with a Standard Bed, a $4,700 increase over pricing announced last October.  Stepping up a tow rating or two, the Silverado HD is now $1,100 more expensive — $1,000 tacked onto the MSRP, the destination charge plumped another $100 to $1,795. The Silvy 2500 HD now starts at $41,295. The Sierra HD turns the screw a few more degrees, going up by $2,100 after the $100 increase for destination. The low bar for the Sierra 2500 HD is $41,995, a $4,100 rise over the price when it hit dealer lots last summer. Whew. Anyone know where the exit is for this "new normal?" Related video:

NHTSA closes 4-year GM investigation, issues common sense advisory [w/video]

Since January 2011, the National Highway Traffic Safety Administration has been investigating a possible problem with corroding brake lines in General Motors' GMT800-platform models, like the Chevrolet Silverado and Suburban and GMC Sierra, in states with salt on their roads in the winter. However, as opposed to launching a full recall of millions of vehicles, the government is issuing a common-sense safety advisory to all drivers in snowy states to keep their vehicle's undercarriage clean. It even has a video explaining things. "Older-model vehicles, often driven in harsh conditions, are subject to corrosion over long periods of time, and we need owners to be vigilant about ensuring they, their passengers, and others on the roads are safe," said NHTSA Administrator Mark Rosekind in the announcement of the end of the investigation. The agency was clear in its report that "brake line corrosion seen in the GM vehicles was not unique," and the government "has not identified a defect that would initiate a recall order." Instead NHTSA is advising drivers, especially those of vehicles from before 2007, to wash their vehicle's undercarriage in the winter and spring to remove salt or other de-icing chemicals. It also recommends regular checks by a mechanic to make sure everything is in proper order. According to the investigation documents, for just the GMT800 platform models, NHTSA found 3,645 complaints of brake line corrosion, which included allegations of 107 crashes and 40 injuries. The issue was found to be more common in vehicles over 10 years old. GM has released a statement (embedded below) that the company "supports the consumer advisory from NHTSA urging regular maintenance and care of brake lines on older vehicles." NHTSA Closes Investigation into Brake-Line Failures NHTSA 13-15 Thursday, April 9, 2015 Agency issues safety advisory on preventing undercarriage corrosion WASHINGTON – The Department of Transportation's National Highway Traffic Safety Administration (NHTSA) today issued a Safety Advisory and consumer video encouraging owners of model year 2007 and older trucks, SUVs and passenger cars to inspect brake lines and thoroughly wash the underside of their vehicles to remove corrosive salt after the long winter in order to prevent brake-line failures that increase the risk of a crash.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.