2008 Cadillac Sts Northstar V8 Dvd, Navigation, Leather, Heated Seats, Loaded on 2040-cars

Auto blog

2020 Cadillac XT5 leaks onto web, adopts elements from smaller XT4

Cadillac just showed the new XT6 at the 2019 Detroit Auto Show, but today's news covers its smaller brother the XT5. A couple of leaked images on GM Authority along with information about the cars squirmed its way onto the web for the 2020 mid-cycle refresh, and we have the details for you. In looking at the shots here, not much has changed. The mesh grille is the most obvious update, adopting the same look as the compact XT4 crossover. Its lower grille has ever-so-slightly grown in size, and the headlights and taillights get new internal LED designs. Yawn. Better news comes out of the powertrain side. Information from the leak suggests GM's updated 2.0-liter turbo four-cylinder will be tapped for duty. As of now, the 2.0-liter offered in international markets has not been an option in the U.S. That could very well change this time around, since it's already being used in one Cadillac — see our first drive of the XT4 with this engine for the full breakdown on its improved refinement and efficiency. The 3.6-liter V6 will undoubtedly carry over, but it'll be getting the GM nine-speed automatic also paired to the new four-cylinder. This should be a marked improvement over the Aisin-based eight-speed torque converter it makes do with now. We weren't exactly blown away by the Cadillac XT6's interior, but expect styling elements from the slightly newer Caddy SUV to make its way to the XT5, too. A reveal for this updated crossover should be on its way soon, as GM will most likely be selling the updated 2020 XT5 before the year is done. We asked GM if it could confirm or deny any of the information in this report, and will update when we hear back. Related video:

Junkyard Gem: 1997 Cadillac Catera

GM's Cadillac Division was having a tough time in the early 1990s, with an onslaught of Lexuses and Infinitis pouring across the Pacific to steal their younger customers while high-end German manufacturers picked off their older customers. Flying an S-Class-priced model between assembly lines in Turin and Hamtramck hadn't worked out, so why not look to the European outposts of the far-flung GM Empire for the next Cadillac? That's how the Catera was born, and I have found a rare first-year example in a North Carolina car graveyard. Across the Atlantic, GM's Opel and Vauxhall were doing good business with prosperous European car buyers by selling them the sleek rear-wheel-drive Omega B (whose platform also lived beneath the Holden VT Commodore in Australia). Here was a genuine German design that competed with success against BMW and Audi on their home turf! So, the Omega B was Americanized and renamed the Catera. Opel wasn't a completely unknown brand to Americans at the time, since its cars were sold here with their own badging through Buick dealerships from the middle 1950s through the late 1970s (for a much shorter period, American Pontiac dealers attempted to sell Vauxhalls). Even after that, plenty of Opel DNA showed up in the products of U.S.-market GM divisions. The Catera was by far the most affordable Cadillac for 1997, with an MSRP starting at $29,995 (about $59,113 in 2024 dollars). Being a genuine German car, it looked much more convincingly European than the DeVille ($36,995), Eldorado ($37,995) and Seville ($39,995). Inspired by the ducks on the Cadillac emblem (they were really supposed to be martlets, mythical birds with no feet and occasionally lacking beaks), Cadillac's marketers went after youthful car shoppers with a whimsical animated duck named Ziggy. For the 21st century, the birds were removed from the Cadillac emblem in order to attract California buyers under 45 years of age. As we all know, the Catera flopped hard in the marketplace. What sold well in Europe turned out not to translate so well in in North America, especially when bearing the badges of such a historically prestigious brand. The Catera's engine was a 54-degree 3.0-liter V6 rated at 200 horsepower and 192 pound-feet. Just as had been the case with its predecessor, the Allante, no manual transmission was available.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.