Message Me For Reserve Price!!! Suv 4.6l Cd Rear Wheel Drive 3rd Row on 2040-cars

Auto blog

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.

Cadillac Celestiq flagship EV shows off its tint-shifting smart roof

GM has high hopes for its upcoming Cadillac Celestiq sedan, slated for release in 2023. The flagship EV is being built to help the brand recapture its reign as “the Standard of the World.” As such, itÂ’s expected to arrive packed to the gills with cutting edge, futuristic technology including an all-glass roof that can adjust its opacity anywhere between crystal clear and completely opaque with the mere flick of a switch. These roofs, dubbed SPD-Smartglass, have been designed and manufactured by Research Frontiers of Woodbury, New York, and are based on Suspended Particle Device technology that was originally created as a replacement for the manual sliding window shades aboard commercial aircraft, Research Frontiers CEO Joe Harary told Engadget. Some of the earliest examples of SPD window treatments can be seen on the 2011 Mercedes Benz SLK roadster and in the 2012 Mercedes S Class coupe, which were used to increase headspace while eliminating the physical window shade screens, as well as various McLaren models over the past decade. As the YouTube video below explains, Research Frontiers SPD tech relies on polyiodide nanoparticles to generate its tint effect. Magic Sky Control Using SPD-SmartGlass Technology “SPD technology is smart glass that allows you to change the tint of the glass,” Harary explained. “There's this film that we invented that has little nanoparticles in it, which you can control with a small electrical voltage. So, basically this film... that allows you to dial in whatever tint level you'd like.”  “The crystals are about three to five tenths of a micron in length and they act as induced dipoles so when you apply an electric field to conductive coatings in the film,” Harary continued, “ the particles will line up, and allow light to pass through. Then, when you remove the voltage, their natural tendency is to be in the dark state due to Brownian movement and that causes the glass to tint.”  As the tint partially blocks incoming photons, it also reduces the amount of glare experienced by the driver and the heat trapped within the vehicle — over 99.5 percent of light and 95 percent of heat, per a January press release from the company. The claim is, this allows vehicle occupants to stay comfortable for longer without having to turn on the A/C, as well as keep the interior up to 18 degrees Fahrenheit cooler overall, Harary said.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.