Awd 4dr Performance Collection Cadillac Srx Performance Low Miles Suv Automatic on 2040-cars

Auto blog

All-new 2019 Cadillac XT4 crossover debuts in New York

Cadillac spent years and years improving its mainline sedans, the CTS and ATS, turning them into awfully good impressions of BMWs from a few years before. The thing is, great sedans aren't selling, and crossovers sure are. Cadillac's XT5 is the only crossover in the lineup, something that's had American Cadillac dealers gnashing their teeth and wailing — although anyone they can upsell into an Escalade can staunch the bleeding. That brings us to the new XT4, which is smaller than the XT5 but even sharper than its bigger sibling. Let's take a closer look at this new two-row luxury crossover. For one, it's based on what Cadillac calls a unique platform. That may be true, technically, although it's likely related to the Equinox/Terrain on some level. Platforms are becoming quite flexible: Look at Volkswagen's MQB, under everything from Euro hatches smaller than our Golf to the three-row Atlas. Whatever else it is underneath the skin, all XT4s will share one powertrain: the corporate 2.0-liter turbocharged inline-four, paired to a nine-speed automatic transmission. View 14 Photos The engine puts out a healthy 237 horsepower and 258 pound-feet of torque, putting it just a hair underneath its closest domestic rival, the Lincoln MKC with the 2.0-liter EcoBoost. Of course, the 2.3-liter MKC beats the XT4 handily, but that's another story. Power is produced with the help of a twin-scroll turbocharger. All-wheel drive is available, with a driver-selectable rear axle disconnect to save a small amount of rolling friction. Cadillac estimates it'll be good for 30 MPG on the freeway, but we haven't seen official results to confirm that. A few other changes that'll affect driving: electro-hydraulic brake assist, a first for Cadillac and mainly a fuel-saving measure; and Continuous Damping Control, which alters the damper's valve continuously based on a number of parameters. It's almost certainly used here because it's lighter and less expensive than air suspension or MagneRide, and it is optional on XT4. CDC or no, all XT4s utilize a front strut and five-link rear suspension. All XT4s also ride on 18-inch wheels in various designs. The trim strategy is mildly interesting. The base model is the Luxury, and then you can choose a Sport (black exterior trim, unique wheels) or a Premium Luxury (bright trim and satin-brushed accents). The interior options are suitably upscale and premium, and we'll have more to say about them a little later when we can see this car up close.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Cadillac is doing a 'second installment' of the CT6-V for $92,790

After being all but certain the Cadillac CT6 would begin pushing American daisies June 1, the brand said "the CT6 was never meant to be fully on the chopping block." The same day we got that news, Cadillac began taking pre-orders for the CT6-V. Limited to 275 units and costing $88,790 after destination, orders came in so quickly that order books closed only hours later. Turns out the phrase "275 pre-order slots" was another slight miscommunication. Cadillac has announced continued production of the CT6-V, this time costing $92,790. In February, Cadillac Society confirmed with the automaker that the 275 figure only applied to pre-orders. It isn't clear how many CT6-Vs will be built in what the brand calls the "second installment," but it is clear that buyers who didn't get in early will pay more. Cars Direct was privy to a letter sent to dealers that said pre-order buyers "were rewarded with a special introductory offer by quickly raising their hand." Those slow on the draw have hopefully used the extra time to fish another $4,000 from their pockets. The elevated price buys the same car that was $88,790 two months ago - nothing has changed but the bottom line. The new MSRP puts more distance between the hot CT6-V and the $89,290 CTS-V. Conversely, the CT6-V with a Blackwing V8 beating 550 horsepower and 627 pound-feet of torque is now just $4,000 less than the coming Platinum V8 trim, which costs $96,790. That Platinum version gets a detuned Blacking putting out 500 hp and 553 lb-ft. The vague phrase "second installment" phrase makes us think Cadillac's not committing to a number so it can cap production at will depending on how this more expensive go-round fares. Still, it's good news for anyone who wanted the sedan new and didn't hit the buzzer quickly enough in January. As if all that weren't surprising enough, GM Authority reported that there's a second-gen CT6 in development. The outlet's sources say the new sedan will move to GM's VSS-R platform, the modular architecture that will replace both the Alpha and Omega platforms. The platform initialism stands for Vehicle Set Strategy - Rear-wheel drive. The car even has a codename: 7ESL, where 7 represents the architecture, E the segment, S the sedan body style, and L the Cadillac brand. Looks like the CT6 will be nothing but surprises this year.