2011 Srx All-wheel Drive Monroof 25k Low Miles Bose Audio Rear Camera Onstar on 2040-cars

Auto blog

Cadillac XT4 crossover reveals its lighting

The upcoming Cadillac XT4 compact crossover has once again been spotted, this time with less camouflage and an update to its lighting. Specifically, the little crossover is sporting production lighting front and rear, and it's sure to make the luxury SUV one of the boldest-looking Cadillacs. Part of the reason for this comes from the taillights. As we suspected from the last set of spy shots, the XT4 will have highly distinctive lights that run the full height of the C-pillar. Though it's a similar design to that of the Escalade, it's made more interesting by the significant forward rake of the rear pillar. Not only that, but that pillar is quite thick, too. The look is actually reminiscent of the old CTS wagon. Moving around the side, the reduced camouflage reveals that the doors and quarter panels are fairly conservative and lacking in many creases or bulges. We can make out the edges of what will likely be black plastic fender flares and rocker panel cladding. Finally reaching the front, we see that the headlights are similar to those of many current Cadillacs, including the recently refreshed XTS sedan. The main part of the lamp starts high up and is slightly horizontal like the Escala concept, but they extend over the fenders and a strip of LEDs descends down the front. A previous report noted the XT4 will be built in Kansas on the Chevy Malibu platform. That means it will be a front-drive-based vehicle likely offering both front- and all-wheel-drive. Under the hood will probably be at least one turbocharged four-cylinder engine, with a second, more powerful upgrade option a possibility. We expect to see the fully revealed model to show up by the end of 2018. Related Video: Featured Gallery Cadillac XT4 spy shots View 15 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt4 cadillac xt3

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

2021 Cadillac Escalade to have a massive 38-inch curved OLED display

The redesigned 2021 Cadillac Escalade is going to be revealed Feb. 4, and it’s going to have a huge screen. Cadillac released a video teaser today showing the enormous display — watch it above. This screen is a curved OLED display that measures 38 inches from corner-to-corner. The exact resolution wasnÂ’t revealed, but Cadillac claims the pixel density is twice that of a 4K television. That particular stat is also rather nebulous, as the pixel density of a 4K TV varies with the TVÂ’s size. Regardless, itÂ’s safe to say that the screen is going to be very sharp and look fantastic. CadillacÂ’s use of an OLED screen will ensure it has spectacular color representation and the best blacks that a screen is capable of. Smartphones with OLED displays typically offer a better experience than those with LCD displays, and we can hope the same is true for this Cadillac display. On top of it being a huge screen, Cadillac also says itÂ’s the “first curved OLED” in the industry. Most infotainment screens in cars these days are flat displays, but Cadillac appears to be sticking its best tech foot forward with this curved screen. Other details worth noting in this teaser is the obvious presence of Super Cruise. The green light stretches across the steering wheel, indicating that the new Escalade will definitely offer the semi-autonomous driving technology. The rest of the interior is difficult to make out, but there appears to be a row of shiny buttons below the screen. Below this we can see what might be the top of the gear lever sticking up. ItÂ’s tough to know for certain what it is, but itÂ’s similar in size, shape and style to other new Cadillac gear levers. However, both the 2021 Chevy Tahoe and Suburban use push-button shifters. The switch to an actual gear lever would be more consistent with other Cadillacs, but inconsistent with its full-size SUV brethren. We wonÂ’t have terribly long to wait to find out. Cadillac says itÂ’s going to reveal the new Escalade in Los Angeles during Oscars week. Expect some of the big stars to roll up to the red carpet in new Escalades. ItÂ’s hard to think of a better place to show off the chromed-up, shiny new Cadillac. Related Video: