2011 Cadillac Srx Luxury Collection on 2040-cars

Auto blog

Cadillac gives enthusiasts an early look at its next high-performance sedans

Cadillac will introduce a pair of sport sedans named CT4-V Blackwing and CT5-V Blackwing, respectively, at 7 p.m. Eastern today (February 1). While car companies routinely drum up excitement for new models by releasing tightly-cropped or blacked-out images, Cadillac surprised us with a photo, and a TV spot that aired during the Rolex 24 at Daytona, that shows both cars in their entirety. Somewhat confusingly, the CT4-V and the CT5-V are not direct replacements for the ATS-V and the CTS-V; they're mid-range models, and they're powered, equipped, and priced accordingly. It's these flagship Blackwing variants that will pick up where the last-generation Vs left off with a significant bump in power, numerous chassis tweaks, and a more aggressive-looking design. They'll arrive in showrooms in time for the 2022 model year. Blackwing drivers won't draw unnecessary attention to themselves, because the visual changes are relatively subtle. Riding on model-specific wheels, the CT4-V Blackwing gains bigger air intakes on the front end, vents punched into the fenders, and a low-key body kit that adds a front splitter, front winglets, and a trunk-mounted spoiler. Cadillac gave the CT5-V a similar treatment, and it mounted the rear wheels on surprisingly wide tires. Cadillac pointed out the Blackwing sedans benefit from the world's fastest-reacting suspension system. It's likely the fourth evolution of its magnetic ride control technology, which it detailed in October 2020.  While full specifications remain under wraps until the duo's unveiling, we know that both sedans will be available with a six-speed manual transmission. It's reasonable to assume that an automatic (likely the familiar 10-speed) will be offered as well. As for what's under the hood, our crystal ball tells us that the CT5-V will land with a V8 engine, though it won't be the short-lived twin-turbocharged Blackwing unit that gave both cars their name. Enginers might have selected an evolution of the CTS-V's 6.2-liter. As for the CT4-V, it will receive the ATS-V's 3.6-liter turbocharged V6. Both models will be exclusively available with rear-wheel-drive. Enthusiasts who want to secure an early built slot will have the chance to reserve a 2022 CT4-V Blackwing or a 2022 CT5-V Blackwing by visiting Cadillac's website shortly after the sedans are unveiled on February 1. As we previously reported, the first 250 units of each car will wear a numbered plaque on the steering wheel.

2020 Cadillac XT5 is barely being refreshed

Cadillac has been making a serious effort to expand its crossover offerings with the all-new XT4 and XT6. With them has come slight changes to Cadillac's design language, leaving the existing XT5 looking a little out of the loop. Well, it appears that's about to change ... sort of. One of our spy photographers caught a 2020 Cadillac XT5 out testing, and it has some changes that suggest a refresh. You do have to look closely to tell anything has changed, though. And even then, the only noticeable change is to the grille, which is now dotted with little quadrilateral shapes similar to those on XT4 and CT5. You can see one of the two current designs below. Otherwise, the bumpers and lights haven't been changed at all. View 21 Photos We suspect there will be other small changes in store for the crossover. It could switch from an eight-speed transmission to a nine-speed unit like the one the XT6 will use. This would be likely considering they both use the same V6 engine. We wouldn't rule out adding an optional turbo four-cylinder engine borrowed from the XT4, but that would be a fairly significant and less likely change. The interior could see some updates, and Cadillac could possibly try to shoehorn in its new infotainment system from the new batch of cars. Then again, changes could simply be limited to new materials and some extra features. With such a light update, we expect the updated 2020 XT5 will make its debut sometime this year with sales coming shortly after.

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.