2010 Cadillac Srx Fwd Luxury Collection Pano Roof Navigation Back Up Cam Loaded on 2040-cars

Auto blog

Junkyard Gem: 1976 Cadillac Eldorado Convertible

Convertibles rode high well in 1960s America, with Detroit selling more than 500,000 ragtops in 1965, but sales collapsed by the early 1970s and tightening federal crash-safety regulations made it seem less worthwhile to even bother producing new ones. Chrysler halted convertible production after 1971, with Ford following suit by 1973. By the 1976 model year, the Cadillac Eldorado was the last new American car you could buy with a convertible top from the factory, and it appeared that none would ever be built again. I've found one of those "last convertible" Eldorados in rough-but-identifiable condition in a Denver junkyard. As it turned out, the convertible never really died in America. Car shoppers could still buy new European-made convertibles after 1976, coachbuilders modified new Detroit cars with factory-grade drop-tops, and then Chrysler began selling K-Car convertibles starting with the 1982 model year. Because the '76 Eldorado appeared to be the absolute end of the convertible line, however, buyers thought they were investing in a sure-fire collector car that would be worth vast sums in the not-very-distant future (this belief led to lawsuits against GM later on, when the Cadillac Division resumed production of the Eldorado convertible for 1984). While a one-of-200-made Bicentennial Edition Eldorado with red-white-and-blue trim really is worth plenty these days, an ordinary 1976 Eldorado in beat-up condition doesn't seem worth restoring. This car appears to have sat outside in Colorado with the top down for decades, filling with snow each winter and enduring high-elevation solar irradiation each summer. A 1960s GTO or Camaro might be worth fixing up after falling into this state of disrepair, but not one of 14,000 "last convertible" Eldorados made in 1976. GM's Unified Powerplant Package front-wheel-drive system, which used battleship-strength chains to transmit power to the drive wheels, proved to be extremely reliable on the street, joining the small-block Chevrolet engine and Hydra-Matic transmission in the pantheon of The General's Greatest Engineering Hits. Even gigantic motorhomes used this system. In 1976, the Eldorado got the last of the 500-cubic-inch (8.2 liter, or litre as GM's marketers spelled it) V8s, rated at a disappointing 190 horsepower and an impressive 360 lb-ft of torque.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Hear the new Cadillac CTS-V torture some tires

The 2016 Cadillac CTS-V seems like the type of wonderful gift that Santa might cook up in his workshop for one extraordinarily good boy or girl. However, the first chance for most people to actually see the super sedan and its carbon fiber pieces in real life is at the 2015 Detroit Auto Show in January. As a stocking stuffer until then, Caddy has released this video highlighting the latest V-Series roasting its tires better than any dinner for the holidays. With the supercharged 6.2-liter V8 from the Chevrolet Corvette Z06 nestled into the CTS-V's engine bay, the Cadillac certainly has quite a bark coming from its exhaust. The mill might be detuned slightly from the 'Vette to 640 horsepower and 630 pound-feet of torque, but that's still plenty for this smoky application. Enjoy this tease of the future V-Series, ahead of the Detroit show. Related Gallery 2016 Cadillac CTS-V View 15 Photos News Source: Cadillac via YouTubeImage Credit: Related images copyright Cadillac Cadillac GM Luxury Performance Videos Sedan