2010 Black Sport Collection! on 2040-cars

Auto blog

Cadillac teases CT4 and CT5 V-Series Blackwing steering wheel

There's quite a bit that we know about the upcoming Cadillac V-Series Blackwing models. Thanks to spy shooters and prototypes, we've seen the CT4-V and CT5-V Blackwing out and about testing on public roads, which means we've seen the bronze wheels in staggered sizes. We've been told they will offer proper manual transmissions, and we know they will lap a race track quicker than the ATS-V and CTS-V they replace. And now we know what their steering wheels will look like. It's not much to base an entire teaser on, but there are a few interesting tidbits we can glean from Caddy's first official Blackwing tease. First, the wheel itself. It's leather wrapped (not Alcantra, at least on this example), it looks to have meaty bulges where you'll want to grip it, it has a red strip at the top to help locate straight ahead while driving aggressively, and it has a carbon fiber V-shaped spoke at the bottom. Finally, we see a prominent silver button labeled "V" on the left side that will allow drivers to quickly access V-Mode. To the right will be buttons for the Performance Traction Management system. Judging by the fuzzy background behind the wheel that shows some sort of digital gauge cluster, it seems that Cadillac may be aiming for a 200-mile-per-hour top speed for the CT5-V. That's not a stretch, as the last-generation CTS-V could hit that speed, too. Cadillac smartly took this shot in a way that blurs the center console, which means there's plenty more time to speculate on the transmission choices. Cadillac says the V-Series Blackwing models will be ready in time for the summer of 2021. Stay tuned. Related Video:  

Next Cadillac Escalade's interior spied for the first time

Update: Now that new spy photos of another large GM SUV have surfaced, we believe these shots show us a GMC Yukon interior, not a Cadillac Escalade. You can see the new spy shots here that depict a much more upscale vehicle interior compared to the fuzzy center stack shown in the shots of the Yukon. The new Cadillac Escalade has a lot of work to do in order to properly compete with Lincoln's wonderfully luxurious Navigator. These interior spy photos are our first look at what Cadillac is working with on the inside of its new luxury truck. We won't make final judgements, as this vehicle is still a prototype and subject to change. However, a few key bits are noticeable from the fuzzy photos. As expected, Cadillac's CUE infotainment and center stack is nowhere to be seen. Replacing it is a new interior design language, with a tablet-like screen that seems to rise out of the sloped stack on top. Below the screen is a strip of stitched leather and a couple prominently placed air vents. To the left of this area is what appears to be a push-button gear shifting system, replacing the column-mounted shifter currently in use. Below all that on a lower level of the center stack are all the climate controls, along with what look like physical buttons for what could be audio-related controls. Does it look as luxurious as the Lincoln? Not with all the coverings and shrouding it doesn't, which means we'll have to wait until we get the full picture. One thing that's clear is that the interior design is definitely going to be wildly different than the current Escalade. That center stack flows downward as one sloping piece into the high and bulky center console area. This design looks like it brings the center console further downward, and also uses a multi-tiered look. It's tough to read what's on the screen, but the software looks like the same stuff we got a preview of on the new Cadillac CT5 and CT4 sedans. As for the exterior shots, there's almost nothing that we haven't already gotten a taste of in previous spy photos. The independent rear suspension is a go, as are what appear to be massive headlight and LED DRL fixtures. If you look through the wrapping, you can make out how far up and down the lighting fixtures stretch ... or perhaps they're separate units altogether. It's tough to tell at this point.

GM extends production cuts, affects Cadillacs, Camaro and Acadia

General Motors is extending production cuts at some of its North America factories due to a chip shortage that has roiled the global automotive industry, the U.S. carmaker said on Thursday. The move's impact has been baked into GM's prior forecast that the shortage could shave up to $2 billion off this year's profit. GM's Lansing Grand River assembly in Michigan will extend its downtime through the week of April 26. The plant makes Chevrolet Camaros and Cadillac CT4 and CT5 sedans. It has been out of action since March 15. GM's Spring Hill assembly in Tennessee will shut down for two weeks starting the week of April 12. The plant makes the Cadillac XT5, XT6 and GMC Acadia. The company said it has not taken downtime or reduced shifts at any of its more profitable full-size truck or full-size SUV plants due to the shortage. The news was first reported by CNBC. Reporting by Ankit Ajmera in Bengaluru; Editing by Maju Samuel and Sriraj Kalluvila