Needs Tlc. Clean 1 Owner Vehicle. This Could Be A $ Maker on 2040-cars

Auto blog

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Meet the other Cadillac wagon. It's as American as ABBA

The Cadillac CTS Wagon became a cult classic the second it went on sale. We all knew that it was never going to sell in anything approaching significant numbers, and if that "we" didn't include those actually working at GM, one would have to wonder what they were smoking. Cadillac was still having a hard enough time trying to convince people that it was now a BMW-fighting sport luxury brand rather than the purveyor of Grandpa-piloted land yachts. To many, a sport sedan like the CTS seemed like a stretch. But a CTS sport wagon? It sure seemed like GM was just doing things for funzies, an impression only enhanced by the CTS-V Wagon. Forget cult classic. That thing was an instant legend.  And yet, the CTS wasn't the only Cadillac of that era offered as a wagon. It wasn't even the first. Before GM said "to hell with it, let's have some fun" on this side of the pond, over in Europe, it had already taken a page from its old badge-engineering playbook to create the 2006 Cadillac BLS Wagon. It was available as a sedan, too, but its awkward majesty is best enjoyed as the long-roof model.  There's just something off about the whole thing, right? That's probably because it also looks vaguely familiar, as if you've seen it before. So where the hell does this thing come from? Sweden! Behind that Cadillac Art and Science face is a Saab 9-3, and in the case of the BLS Wagon, the Saab 9-3 Sport Combi wagon. The roofline is the dead giveaway, as no other wagon has ever looked like that. In fact, the roof and windows were the only exterior elements to copy directly over from 9-3 to BLS. No kidding. With the Cadillac front end, doesn't the Saab-funky-boxiness make it look like a miniature hearse? The answer is yes. GM's design team, led by Ed Welburn, was quite pleased with his work. Perhaps it even egged him on to create a real Cadillac sport wagon? "The whole team was very excited to apply Cadillac's design language to a wagon for the first time," said Welburn in a press release from the time. "The V-shaped chrome-plated grille, a Cadillac hallmark, is picked up again by the shape of the rear window, and the body side character lines make it unmistakably a Cadillac." The interior is surprisingly different from the 9-3, including the ignition switch migrating from the center console up to the steering column. It also wasn't exactly in keeping with the Cadillac norm of the time.