1998 Cadillac Seville Sls Sedan 4-door 4.6l on 2040-cars

Auto blog

The CadMad shooting brake Eldorado Brougham-Nomad cross is up for auction

The CadMad custom 1959 Cadillac Eldorado Brougham is the coolest car crossing the block at the Scottsdale Barrett-Jackson auction. All arguments to the contrary are wrong and can be redirected straight to the gallery above. This 16-year project built by Super Rides and commissioned by the late Steve Barton won the Don Ridler Memorial Award at the 2019 Detroit Autorama, which goes to the custom build that shows the best creativity, engineering and quality workmanship. All of those qualities are on full display in this Eldorado Brougham-Nomad mashup. Just so we’re all on the same page, a 1959 Cadillac Eldorado Brougham was no normal Cadillac at the time. The sedanÂ’s exterior design is thanks to Pininfarina, as Cadillac had the Italian design company tweak its styling. It resulted in a much more subdued Cadillac than the rest of Caddy's giant fin-tastic designs of the decade. Only 200 were made over the course of a couple years, and they remain some of the rarest production Cadillacs to this day. The “Fawntana Rose” Cadillac standing before us is a shooting brake interpretation of that famous sedan. It has lost 18 inches in overall length, four inches in width and the rear doors have been completely eliminated. A Chevy Nomad roof was shortened by a couple inches and grafted onto the bodywork. The builders say that every last piece of sheet metal was modified for this build. Still, thereÂ’s still no mistaking it for a Cadillac. The chrome bumpers and lights were left mostly untouched, and the small fins were retained, as well. That Nomad roof was painted in Titanium Silver for contrast, the same silver thatÂ’s used on the new Ford GT. Things only improve when you open the hood. A 632-cubic-inch twin-turbo V8 built by Nelson Racing Engines (NRE) powers the shooting brake. Most of the time (on 91 octane fuel), it produces around 1,000 horsepower and 950 pound-feet of torque. Feed it 112 octane fuel and NRE claims itÂ’s capable of producing upwards of 2,500 horsepower. Yowza. A four-speed automatic transmission and strengthened Corvette transaxle somehow attempts to put the power down to the rear wheels. The seats are reflective of the amount of power this car puts down — 2012 Cadillac CTS-V buckets were used and modified with mauve-colored upholstery. All the trim was hand-painted, including the wood-grain flooring in back and is meant to “mimic the African Wenge and Tigerwood Maple.”  The time and effort that went into this built is truly astounding.

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.