1977 Cadillac Seville Base Sedan 4-door 5.7l on 2040-cars

Auto blog

Cadillac SRX production moving to TN, next-gen Equinox going to Mexico

It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.

New V6 engines are only the start at Cadillac

Cadillac debuted its new family of V6 engines Friday, but that's not all General Motors' luxury brand has in store for the coming years. The six-cylinder powerplants will certainly help Cadillac in the near term, but they're just two of the many parts of the company's future strategy. GM has invested $12 billion in Cadillac to help the brand grow over the next five years, and the company will launch eight new products between now and 2020. That all starts with the launch of the CT6 flagship later this year – a fullsize luxury sedan we'll see for the first time in New York on March 31. The CT6 will introduce several new features and technologies to the Cadillac range, and with its launch also begins the slow restructuring of Cadillac's model-naming system. The new nomenclature means CT and XT badges for cars and utilities, respectively. Cadillac says that of the eight new vehicles it plans to launch by 2020, five of them will be first-time offerings in market segments where the brand currently does not play. But it's not just about new products – new powertrains are an important part of the Cadillac story, too. After the new V6 engines – a naturally aspirated 3.6-liter and a twin-turbocharged 3.0-liter engine – launch later this year in the 2016 ATS, CTS and CT6, the company says it has a strategy for V8 power – possibly a twin-turbo application – as well as future electrification. Cadillac also says it's working on adding four- and six-cylinder diesel powertrains, though it's unclear which vehicles will make use of those engines. This new six-cylinder engine family is indeed important, with Cadillac's chief engineer, David Leone, calling it the "most advanced V6 in the industry." With 335 horsepower, the 3.6-liter engine is the highest output, naturally aspirated V6 powerplant Cadillac has done – and that's SAE-certified, and on regular fuel. Beyond that, the 3.0-liter mill (pictured at right) marks the first application of GM's active fuel management system on a twin-turbocharged engine. This means that when full power isn't necessary, the TTV6 can run as a 2.0-liter V4 in order to save fuel. New transmissions are also part of the V6 engine story. GM's all-new eight-speed Hydra-Matic 8L45 gearbox will be paired to the 3.6-liter V6, and the 3.0-liter TTV6 will use the company's existing 8L90 transmission that is already found in the Chevrolet Silverado and GMC Sierra pickups (with the 6.2-liter engine).

2020 Cadillac Escalade spied for the first time

Cadillac is expanding its crossover and SUV range with a new three-row XT6, but that doesn't mean it has forgotten about the one that started it all. As seen in the above photos, the company is testing a new version of the Cadillac Escalade. It's well-covered, but there are a number of details that we can make out. We'll get to what we can see of the design in a bit, but the big news is the suspension. Like the new Tahoe we previously spied, the 2020 Cadillac Escalade will have an independent rear suspension replacing the solid axle set-up that GM's full-size SUVs have always possessed. Its rivals from Ford/Lincoln went independent long ago. We can't underline enough how much of a difference this will make. Handling should be less cumbersome and the ride will be smoother and less prone to jiggling over bumps. It would be improved even further if Cadillac continues to offer magnetically controlled shocks as standard. Inside, the third-row should be positioned lower, thus lowering the current sky-high load height and resulting in a third-row that's actually habitable. In other words, the Escalade won't be so archaic. You can see the visual differences between the new (top) and current (bottom) designs below. Now, as for the design, our best clue to the new Escalade's design is in the grille. The flashy slatted chrome grille of the current model is gone and in its place a more modest mesh grille with little studs pushed to the front. It's very much like the grille found on the new CT6 and XT4. Also, like those two vehicles, the headlights appear to have more horizontal elements than the very vertical examples on the current Escalade. The rest of the SUV is harder to make out. The profile is very similar to the current one, and will surely be shared with the Chevy Tahoe and Suburban and GMC Yukon models. The rear features new rectangular exhaust tips nestled into the rear bumper. The taillights will likely continue to stretch up the rear pillars. Like the suspension, the Escalade will continue to be generally mechanically the same as the aforementioned Chevy and GMC versions, albeit with the best parts standard. The updated 6.2-liter V8 with Dynamic Fuel Management first introduced on the Silverado and Sierra will likely be the standard engine. It will then be paired with the 10-speed automatic transmission. With the new Navigator so widely impressing in reviews and in sales, this new Cadillac Escalade will have to step it up.