1977 Cadillac Seviile on 2040-cars

Auto blog

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.

Mystery Cadillac Escalade prototype spied testing on public roads

This mystery Cadillac Escalade prototype could be a rumored V model featuring a supercharged LT4 V8. This prototype, sporting a fancy exhaust and other unique elements under fairly elaborate camouflage, was spied testing on public roads in Michigan.  Since it's still quite comprehensively disguised, we can't say much for certain about what this prototype has going on underneath. We can see a new set of wheels, a quad-tip exhaust and what appears to be a redesigned lower front bumper, but our spies didn't indicate anything else definitive — not even the telltale whine of a supercharger. That seems a glaring omission, given that a V model would almost certainly be powered by the same supercharged V8 found in the CT5-V Blackwing, where it is expected to develop well north of 650 horsepower.  Cadillac chief engineer Tony Roma has previously suggested that more V-badged cars are in the pipeline without confirming which ones or when to expect them. An unverified report published in February 2021 claims the Escalade's 6.2-liter V8 will soon receive a 200-horsepower bump thanks to a factory-backed, dealer-installed supercharger; a full-fledged V model would take that formula a step further. If you're not familiar with Cadillac's latest performance offerings, "V" models are now the mid-range performance variants, similar to Audi's "S" cars in that they offer a bump in power and handling but stop short of being full-blown track monsters. That treatment is reserved for the new "Blackwing" nameplate, which was derived from the twin-turbocharged V8 of that same name that was originally slated to power those range-topping models.  Related video:

GM laying off 510 amidst slow Cadillac, small car sales

General Motors is laying off about 510 workers from two factories beginning in January, and it could be months before the automaker needs some of that latent capacity to come back on line. A combination of poor sales and high dealer inventories are prompting the cutbacks, according to Automotive News.
The largest changes come at GM's Lansing Grand River plant, where the Cadillac ATS and CTS are made. An entire shift of about 350 workers is being laid off, but the automaker hopes to find positions for some of them at other nearby factories. The decision leaves just a single shift building vehicles there. According to Automotive News, the move is partially spurred by Johan de Nysschen's plan to make Cadillac a more exclusive brand.
The lost shift will likely return for production of the next-generation Chevrolet Camaro at the plant, according to the report, but GM isn't saying when that will be. A previous announcement from the Canadian Auto Workers union indicated that the Oshawa, Ontario, factory would lose the coupe in late 2015 or early 2016.