One Owner~factory Chrome Wheels~rare Lt1 Engine~ on 2040-cars

Auto blog

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Cadillac Elmiraj has production potential

There are many reasons to love the Cadillac Elmiraj Concept, but not the least of which is how production-ready this big coupe appears to be. Take out the overly fancy interior and a few conceptual elements of the exterior, and this looks like a coupe that could be in dealers now as the successor to the Eldorado.
On top of that, Automotive News is quoting Bob Ferguson, Cadillac senior vice president, as saying that a production version of this car is "very doable." AN adds that if the Monterey showstopper gets the green-light, this car would compete against the upcoming Mercedes-Benz S-Class Coupe and would based on Cadillac's upcoming rear-wheel-drive flagship sedan due out in 2015. The range-topping coupe would debut sometime after the sedan model. Cross your fingers.

Cadillac: The standard of what?

Cadillac's tagline "Standard of the World" goes back to 1908 when it won the Dewar Trophy. While you might think that the moniker and the trophy have something to do with a feat of racing and daring-do against a cadre of British, French, and German marques, it's nothing of the sort. Rather, Cadillac achieved the trophy because of interchangeable parts. The parts they were producing back then were so well-made that Henry Leland, who established Cadillac, was able to disassemble three Model Ks, mix up the parts, and then put together three functioning cars. This amazed the Brits who handed him the trophy, and the "Standard of the World" was born. During the past several months, Cadillac has been producing news releases that would seem as though the company is the Standard of the World: "Cadillac Global Sales Rise 44.2 percent in January ... 18 percent in February ... 22.1 percent in March. . .40.9 percent in April ... 33.8 percent in May ... 7.2 percent in June." Like the Dewar Trophy being about manufacturing not performance, things are not necessarily what they seem. That is, Cadillac's growth is predicated on performance in China, not in the US. Through June, its China sales are 80,357 vehicles for the first five months of 2017, versus 72,073 in the US. The China number is a 75.4-percent year-over-year increase while the US number is a 1.6-percent decrease. For the entire globe, Cadillac has sold 164,174 vehicles. Of them, 65,250 were the XT5. That was followed by the ATS, at 34,277 units. In the US, the XT5 is doing reasonably well, as it has moved 29,798 units during the first six months. The ATS, conversely, is doing not particularly well, as it is down 26.2 percent with sales at just 7,209 for the year so far. To put that into some sort of context, know that Cadillac has sold 7,370 copies of the generally derided XTS, which is down 24.7 percent. The CTS is down 36 percent at 5,059 units, and the only other car in the lineup (we'll pretend that the ELR doesn't exist anymore and it shortly won't), the CT6 sedan, is up 172.7 percent – but they have sold only 5,397 CT6s. While Caddy talks a good game about competing with the likes of the BMW 5 Series and the Mercedes E-Class, know that those two sedans have been sold 17,036 and 20,783 times this year in the US respectively. So what is Cadillac chief Johan de Nysschen to do? According to Reuters, it is to cull the lineup.