1990 Cadillac Fleetwood Brougham Limousine - Hilton Limo - Lasvegas Limousine on 2040-cars

Auto blog

Why does this Cadillac fob seem to be for a mid-engine roadster?

Is GM bringing back its Caddied-up Corvette sibling, the Cadillac XLR — only this time based on the mid-engine Corvette? That's the question posed by photos of a wedge-shaped Cadillac key fob someone provided to The Drive. The buttons show a trunk — and also a frunk. So, mid-engine, unless the fob goes with an EV that has its motors and other electrical bits scattered to the wheels and elsewhere. Also, there's a button to operate a droptop. And the car profile on the fob is Corvette-like. All of which makes for some pretty great speculation. Except that Cadillac's way back from the failures of its sedan-centric lineup was thought to be through SUVs such as the new XT4 compact crossover, the XT5 and the somewhere-in-testing three-row XT6. Plus, the XLR, which was produced between 2003 and 2009, hit its sales peak in 2005 of just 3,730 cars, or about one-tenth the sales volume of the Corvette. So it's hard to imagine there's a vast untapped market out there for the luxury roadster — plus the XLR's demographic of well-to-do grandpas is dying off, or at least thinks it is. So a resurrected XLR would seem to be an unlikely savior. A lot's happening with GM's luxury brand — the debut of the XT4 at long last, a new boss, a thinning of the sedan herd but expansion of the V's, a backtrack to Detroit after its New York sojourn, the cash-cow Escalade under direct assault from the fine new Lincoln Navigator, and the impressive performance of its Super Cruise technology. But an XLR? So what is this fob's story? The Drive speculates it's a universal test fob and the buttons don't necessarily mean a thing, or that somebody stuck a Caddy emblem on it just to yank our chains. Who's to say. What would you like it to mean? Related Video:

Cadillac CT5 spied with quad exhaust, could signal a hotter version is coming

The 2020 Cadillac CT5 just broke cover at the NY Auto Show this year, but one of our spy shooters caught one decked out in camouflage looking a bit different than the versions we've already seen. Instead of the dual exhaust on both the turbocharged four-cylinder and twin-turbo V6, this one has a quad exhaust outlet. We'll note that the placement of the quad outlets is one and the same with the two larger outlets on the CT5 already revealed. Also, the rest of the car looks relatively ho-hum. It has the wheels from the CT5 Sport trim, and the front end appears to most closely represent the Luxury trim. Some of the coverings appear to be opened up on that front end, possibly in an attempt to increase airflow. The most obvious change of them all is the quad exhaust, though, which brings us back to a conversation we had with a Cadillac representative at the car's initial media launch. As we were standing around gawking at the new CT5 in Sport trim, a brand representative told us all the "Sport" models (four-cylinders and V6s) would be getting quad exhaust, while the "Luxury" trims would get dual exhaust. We pointed at the CT5 Sport right in front of us and noted that it just had a dual exhaust setup. This ended up causing more confusion, as the Cadillac representative was adamant that they had seen the CT5 Sport with quad exhaust. When all was said and done, there wasn't exactly a clear explanation given for what was up with this mysterious CT5 model with quad exhaust, so we left it at that. We can guess, though. Perhaps the Cadillac rep had seen a Sport model with quad exhaust, but it was a future "V-Sport" variant we weren't allowed to know of yet. Cadillac hasn't revealed its future plans for the CT5 fully, but it did hint that at least one performance variant would be on the way. This camo'd up car here does not look anything like a full-on V model, but it could be the beginnings of a slightly more powerful version of the sport sedan. The 3.0-liter twin-turbo V6 makes 335 horsepower and 400 pound-feet of torque. Of course, there's always room for more power in this class, and a V-Sport model would slot in nicely to the new sedan's range. Keep in mind this all remains speculative in nature. However, our curious conversation with Cadillac combined with these spy shots signal that something could be afoot.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.