2002 Cadillac Escalade on 2040-cars
Mentor, Ohio, United States
|
For sale is a 2002 Cadillac Escalade with 224,576 miles. Vehicle does have a rebuilt salvage title. Vehicle runs and drives great and is in good condition for the year and amount of mileage. The all wheel drive is not operable at this time and only operates in two wheel drive ( believed to be a problem with the front differential). Air conditioning blows ice cold, leather seats are worn and the driver's seat has a tear ( a new cover for the driver's seat will be included with the sale of this vehicle). Comes with heated front seats, power side mirrors, Bose stereo system, 6 disc in-dash cd changer, rear climate control, third row seating, On Star capabilities, steering wheel controls for the radio and wood trim accents. The exterior has some minor rust on both front fenders, and minor damage to the rear bumper cover, see attached pictures for damage. Brand new shocks and brand new Cooper tires have been installed. The tires have less than 50 miles on them. This vehicle is located at my shop in Mentor, Ohio if anyone would like to test drive or look at the vehicle prior to bidding. This vehicle is being sold AS IS and comes with no warranties or guarantees. A low reserve has been set, good luck bidding.
|
Cadillac Escalade for Sale
2013 cadillac escalade 2wd 4dr clean title and car fax 22 inch wheels
2008 cadillac escalade platinum sport utility 4-door 6.2l
2011 cadillac escalade luxury sport utility 4-door 6.2l
2006 cadillac escalade esv pearl color fully loaded!(US $14,999.00)
06 cadillac escalade awd navi gps 4x4 dvd select edition
2013 cadillac escalade esv premium sunroof nav dvd 3k texas direct auto(US $64,980.00)
Auto Services in Ohio
Xenia Radiator & Auto Service ★★★★★
West Main Auto Repair ★★★★★
Top Knotch Automotive ★★★★★
Tom Hatem Automotive ★★★★★
Stanford Allen Chevrolet Cadillac ★★★★★
Soft Touch Car Wash Systems ★★★★★
Auto blog
2014 Cadillac CTS starts $7k higher than last model at $46,025*
Thu, 13 Jun 2013The redesigned 2014 Cadillac CTS will be more powerful, stylish and luxurious than its predecessor, but it will also be much more expensive. With a new starting price of $46,025 (*including $925 for destination), the 2014 CTS represents a price increase of more than $7,000 compared to the 2013 model, but it should be more appropriately sized and equipped to take on rivals like the BMW 5 Series and Mercedes-Benz E-Class, which start at $47,800 and $51,900, respectively.
Available trim levels - referred to as Collections - include Luxury, Performance and Premium, offering either a 2.0-liter turbocharged inline four-cylinder or a 3.6-liter V6 and the choice of either rear- or all-wheel-drive configurations. For more performance, the all-new CTS Vsport model will have an asking price of $59,995. This 420-horsepower model is more powerful than both the BMW 550i and Mercedes E550 and about $2,000 less expensive than both.
There's still no word on what Cadillac has in store for a next-gen CTS-V sedan, but we're guessing power and price will both rise considerably. Scroll down for more info on the 2014 CTS that is set to go on sale this fall.
Cadillac president de Nysschen says electrification coming 'across the spectrum'
Thu, Jan 22 2015We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video:
Cadillac SRX production moving to TN, next-gen Equinox going to Mexico
Fri, 29 Aug 2014It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.




















