00 Cadillac Escalade Awd on 2040-cars

Auto blog

Junkyard Gem: 1998 Cadillac Catera

Every so often, during the last few decades of the 20th century, the suits running each of the big Detroit automakers would eye their European subsidiaries and decide that some car from the other side of the Atlantic could be making dollars over here in addition to pounds or francs or Deutschmarks over there. Chrysler didn't do so well with Simca 1204s or Plymouth-badged Hillman Avengers in the American marketplace (though the Simca-based Omnirizon did very well). Ford USA moved quite a few Capris and Fiestas during the 1970s, then bombed with the Merkur Scorpio and XR4Ti. General Motors tried, over and over, to get Americans to buy Opels (some sold by Buick dealers, others actually badged as Buicks), and I still see the occasional Kadett, GT, or Manta in junkyards to this day. For the 1997 model year, still stinging from the not-so-great sales of the Turin-Hamtramck-built Cadillac Allante, GM took the Omel Omega B and applied Cadillac badges. The result was the Catera, and I found this silver '98 in a Denver self-service yard recently. The Catera had a lot going for it, with a rear-wheel-drive layout and a modern V6 engine that made more power than the BMW 528i's straight-six that year. It should have been able to compete with European luxury sedans in North America because it was a European luxury sedan. Unfortunately, you couldn't get a manual transmission in the Catera, "traditional" Cadillac shoppers thought the Catera lacked a sufficiently massive presence, and younger Cadillac buyers flocked straight to the Escalade starting in 1999. After 2001, the Catera was no more. I still find Cateras in junkyards, nearly 20 years after the last ones were sold, so they appear to have held together pretty well. This one was in nice shape until the end, with all the original manuals still in the glovebox. Even the Catera ballpoint pen remained with the car for its whole life. As we can see in the owner's manual, Cadillac marketed the Catera as "The Caddy That Zigs." The idea was that younger car shoppers would become as Cadillac-obsessed as their grandparents had been. Inspired by the ducks in the Cadillac logo, the Catera marketing team created Ziggy the Duck to pitch this car. Things didn't go so well. The Catera listed at $29,995 in 1998, about $47,600 in 2020 dollars. That made it an affordable alternative to the BMW 5-Series or Acura 3.2 TL, but total Catera sales came to fewer than 95,000 cars over five model years.

Cadillac shows 2015 Escalade interior

Following the reveal of the new GMC Yukon, Chevy Tahoe and Suburban, the next in line is Cadillac, which is set to unveil the new Escalade on October 7 in New York. And in the lead-up to the reveal, the company has released this third teaser image, giving us a good glimpse of the 'Slade's interior.
Or part of the interior, we should say, because while the image above clearly shows the new dashboard and center console, as well as parts of the front seats and interior door panels, the Escalade is most certainly not a two-seat coupe. The outgoing Escalade can accommodate up to eight in either standard or ESV form (but not in EXT pickup configuration), and the new model promises to deliver the same, and we're curious to see what Cadillac has in store for the rear passenger compartment.
Compared to its more accessible counterparts, the new Escalade clearly offers a more upscale environment than even the uplevel Yukon Denali, with softer-looking leather, richer wood veneer and a waterfall center infotainment console that's different from the more modular design in the Chevy and GMC. The steering wheel is also unique and the instrument cluster appears to meld more smoothly across the dashboard, but the door mirrors, wide center armrest, column shifter and A-pillar grab handle all look like they were carried over from the Escalade's platform mates.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.