2014 Cadillac Elr Base on 2040-cars

Auto blog

GM under fire from safety advocates over braking problem caused by recall fix

Safety experts are lambasting General Motors over what they say is the automaker’s slow notification of owners of certain 2019 sedans and trucks that a recall fix could cause power braking to fail and increase the risk of a crash, the Detroit Free Press reports.  GMÂ’s original recall in December targeted about 550,000 Cadillac CT6 sedans and Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, all from the 2019 model year, over potentially defective electronic stability control and antilock brakes. In that case, GM said the errors would not show up as a diagnostic warning on the instrument cluster. But after GM had done recall work on 162,000 vehicles, about 1,700 owner have complained that their power brakes didnÂ’t work after they had the recall done and then used the OnStar app to start their vehicle. GM then issued a supplemental fix for customers whoÂ’d already had their vehicles serviced. In this case, a diagnostic warning should illuminate saying either “Service Brake Assist” or “Service ECS,” which GM says is a signal that a customer should not drive the vehicle and instead call their dealer, which will tow the vehicle and have it repaired. Safety advocates say the automaker hasnÂ’t gone far enough to protect customers. “The fact that you could potentially start a vehicle and not have brakes is a pretty risky proposition,” Sean Kane, president of the Safety Research and Strategies, which works on auto issues for plaintiffs and governmental organizations, told the Freep. “The fact that they wouldnÂ’t notify owners (sooner) is pretty stunning.” GM told the Freep it was required to notify the National Highway Traffic Safety Administration and file paperwork before it notified customers about the original recall, which was made Dec. 12. It then had to investigate and resolve the problem created by its original recall fix before alerting customers. GMÂ’s call center and dealers are contacting the remaining 900 customers who havenÂ’t yet had the update made to the original recall repair. GM also hired a vendor to send recall letters to the 550,000 customers affected by the original recall notifying them about the update. There are no known injuries or deaths related to the problem. Read the Freep story here.

Cadillac confirms Blackwings will get manual transmissions and 3D-printed parts

Cadillac's upcoming 2022 CT4-V and CT5-V Blackwing will be the first GM production cars to utilize 3D-printed technology. In fact, the technology will be featured front and center on one of the cars' most hotly anticipated features — in a decorative medallion atop the shift knob of the manual transmission. Cadillac says that "additive manufacturing" (named as such because 3D printing accumulates tiny deposits of material to create the object) made the manual transmissions possible by reducing costs and waste. Aside from the medallion, the cars will employ two 3D-printed two HVAC ducts and an electrical harness bracket. "[The manual transmission is] something we know V-Series buyers want and itÂ’s something we knew we had to have, so we used innovative processes to make it happen,” said Cadillac performance variant manager Mirza Grebovic. Speaking of which, Cadillac commissioned a Harris Poll survey about manual transmissions and received some interesting results. For example, 66 percent of American adults surveyed know how to drive manual, and 55 percent said they've owned a standard shift car. Of those who don't, roughly 40 percent are either somewhat or very interested in learning. Interest is highest among two key demographics, 64 percent of those earning $75,000 or more in annual household income, and 62 percent of those ages 18-34. The findings seem to contradict what many automakers have said about lack of interest in manuals, with some declaring a sub-1 percent take rate when manuals are offered. Perhaps with a performance-oriented car such as the V-series, buyer preferences change. The mix of old school gearboxes and new school manufacturing techniques will result in what looks like a very potent car on paper. The CT5-V Blackwing is rumored to be powered by an updated 6.2-litter V8, while the CTS-4 Blackwing is said to be motivated by a turbo six. Neither will use the twin-turbo 4.2-liter V8 of their namesake, but they should prove to be worthy successors to the CTS-V and ATS-V. Related Video:

Cadillac Celestiq electric sedan could top $200,000

General Motors teased a slew of new electric vehicles last week at a media event where cameras weren’t allowed, and now thereÂ’s more news about the Celestiq, one of the two EVs in the pipeline for Cadillac. Reports suggest it wonÂ’t come cheap and will retail for at least $200,000. Wall Street Journal auto writer Mike Colias dished that detail, along with word of a mid-2020 launch, on Twitter, attributing it directly to Cadillac President Steve Carlisle. Cadillac has made no official mention of starting price for either the Celestiq luxury sedan or the Lyriq, an EV SUV that it has previously teased. A spokesman told Autoblog the brand wouldnÂ’t comment on future product speculation. Leftover scraps from Cadillac flagship ‘CelestiqÂ’ news: ItÂ’ll be hand-built in the hundreds per year, Caddy chief Steve Carlisle said. Price? Six figures Â… “and it wonÂ’t have a 1 in front of it.” Due mid-2022. — Mike Colias (@MikeColias) March 5, 2020 If true, the six-figure MSRP would make the Celestiq the most expensive Caddy ever assembled, at least outside of one-off coach builds and the presidential limo, vaunting it into the same class as brands like Bentley, Lamborghini and Rolls-Royce. By way of comparison, the limited-edition ultra-luxury 1957 Cadillac Eldorado Brougham four-door debuted with a $13,074 price tag, the most expensive car of its day and the equivalent of around $120,000 in todayÂ’s dollars. So what do we know about the Celestiq? For starters, itÂ’ll be a halo flagship hand-built in limited quantities somewhere in the Detroit area. Our reporters who saw the white four-seater describe it as having a long, fastback roofline, no side mirrors or visible door handles, with a long wheelbase, short overhangs and a tinted glass roof. A rendering of the interior showed an LED instrument cluster and infotainment display that stretches between both A pillars, with touchscreen interfaces on the rear of the front seats. It also reportedly features a hatch instead of a conventional trunk and styling cues from the Escala concept from 2016, shown above. Cadillac teased it as the “ultimate luxury experience” and said it would be highly customizable. Cadillac also showed off the Lyriq, the name itÂ’s given to its midsize electric crossover that it had previously promised to unveil in April, possibly at the New York Auto Show, if it manages to happen given the coronavirus.