1958 Cadillac Eldorado Biarritz Convertible on 2040-cars

Auto blog

Hottest Cadillac CT4-V and CT5-V rumored to offer manual transmissions

We recently received one large detail to fill in the picture of the hottest versions of the Cadillac CT4-V and CT5-V, the sedans maybe or maybe not called Blackwing. As you know, due to a platform switch caused by cost cutting at parent GM, the 4.2-liter twin-turbo Blackwing V8 won't figure in the equation because it won't fit in the engine bay of either sedan. The new, gone-too-soon engine is too wide and too tall. The hottest V models will turn to stalwarts in the range, the CT4-V appearing to get the 3.6-liter twin-turbo V6 used in the departed ATS-V, the CT5-V working with the 6.2-liter supercharged V8 also put to use in the Chevrolet Camaro ZL1 and C7 Corvette Z06. But all of this could mean good news for three-pedal enthusiasts; both engines have been paired with manual transmissions previously, and Muscle Cars & Trucks says both of the coming flagship V models will get manual transmissions. We've expected a manual in the CT4-V. Not only did GM President Mark Reuss say, "Cadillac will make manuals in V-Series" during the launch of the milder V variants, but spy video of the CT4-V from last summer captured a camouflaged CT4-V looking and acting like a car with a manual gearbox. However, no one surmised that the CT5-V would get a manual, too. None of the bigger sedan's competition is sold with a stick shift, and the retired CTS-V with the same 6.2-liter supercharged V8 was only sold with an eight-speed automatic, while just one aisle over the Camaro ZL1 offered a six-speed manual and the Corvette Z06 a seven-speed manual. The last time Cadillac put a row-your-own in the midsize luxury scorcher was the second-gen CTS-V — the one that came in a wagon bodystyle, too — which paired a supercharged LS9 V8 derived from the C6 Corvette ZR1 and a six-speed Tremec manual. MCT doesn't cite any sources, so take this as rumor for now. It's possible to read Reuss' statement in line with this rumor, though. The assumption has been that the plural "manuals" referred to multiple stick shifts going into multiple CT4-V sedans, whereas he could have meant there will be two manual-equipped sedans in the V-Series range. We'll hope for the best and see what pops out of the transmission tunnels on both sedans when they debut later this year. Related Video:

Cadillac SRX production moving to TN, next-gen Equinox going to Mexico

It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.

2020 Cadillac CT5 prototype shows off more lighting details

The elusive 2020 Cadillac CT5 luxury sports sedan has once again been spotted by a spy photographer. This time, we get to see it from all angles, whereas last time we only saw it from the front. It still has quite a bit of fake body work, and it's very clear Cadillac still hopes you'll think this is a Charger, from the big hood scoop to the fake full-width taillights. Digging past those misdirects, we can find some new details about the car. First, the car's front lighting has developed further. There are production-ready headlights fitted that appear to have some sort of LED illumination. These production lights also fit the shape we saw on the last prototype, so they'll end high up on the body, extending slightly horizontally toward the grille. There's still a section that extends back along the fender, seeming to bridge the gap between current Cadillacs and the Escala concept from which this car takes inspiration. Another addition are the vertical LED accent lights. This is another trademark feature of both current Cadillacs and the Escala, but they were absent from the last prototype we saw. We also get a look at some of the grille's details. Instead of slats, this CT5 has a plastic mesh of small rectangles. The pattern is reminiscent of brickwork. These photos also give us our first look at the back of the CT5. It looks like a fairly typical Cadillac. It's much more conservative than the front end. There are some angular cutouts in the bumper to allow exhaust gases out. The taillights have the current Cadillac look with the top curving over the rear fender. We can't tell if there will be a horizontal element like on the Escala, due to the fake lights. We're expecting the CT5 to be shown sometime next year in time for the 2020 model year. Odds are it will use off-the-shelf Cadillac engines including the turbocharged 2.0-liter four-cylinder, naturally aspirated 3.6-liter V6, and the twin-turbo 3.0-liter V6. Now that Cadillac has revealed its twin-turbo 4.2-liter V8, we'll be interested to see if that shows up in a future CT5-V. Related Video: Featured Gallery Cadillac CT5 prototype spy shots View 23 Photos Image Credit: SpiedBilde Spy Photos Cadillac Luxury Sedan cadillac ct5 cadillac escala