2011 Cadillac Dts Platinum Sedan 4-door 4.6l on 2040-cars

Auto blog

2022 Cadillac CT5-V Blackwing will get carbon fiber seat backs

Cadillac is putting the finishing touches on the 2022 CT5-V Blackwing, the high-performance sedan that will pick up where the CTS-V left off. It announced the model will be available with carbon fiber front seat backs. Presumably found on the list of extra-cost options, the weight-saving carbon fiber seat backs will stand out with a book-matched design and a laser-etched V-Series logo that will remind the passengers sitting in the back that they're not riding in a regular CT5-V. Interestingly, Cadillac noted the seats will also boast "other customer-centric innovations and features" that will be detailed closer to the sedan's on-sale date. Chairs are hardly on the front lines of automotive innovation, so we're looking forward to learning more about what Cadillac has in store. Drivers will have carbon fiber in front of them, too, because the multi-function steering wheel's bottom spokes will be made with the composite material. Cadillac hinted the sedan's top speed will lie in the vicinity of 200 mph. 2021 Cadillac CT5-V Blackwing spied View 15 Photos Nearly everything else we know about the CT5-V Blackwing comes from a diverse selection of rumors, industry murmurings, and spy shots. We learned earlier in 2020 that it might receive an updated version of the 6.2-liter V8 that powered its predecessor, not the 4.2-liter Blackwing engine it's named after, and leaked images strongly suggest a manual transmission will be available, though we assume Cadillac will also offer an automatic. It might be a six-speed stick, or Cadillac could use a version of the Chevrolet Corvette's seven-speed manual. Our questions will be answered when the 2022 Cadillac CT5-V Blackwing finally makes its debut. It's scheduled to go on sale in the summer of 2021, so its unveiling is likely a couple of weeks away, and Cadillac warned availability will be limited. The smaller CT4 which replaced the ATS, is also in line to get the Blackwing treatment.

Cadillac SRX and Saab 9-4X recalled for suspension defect

General Motors has recalled 380,498 vehicles due to rear suspension toe link adjusters that may not have been tightened properly, which could result in a loose toe link. The vehicles affected by the recall are Cadillac SRX crossovers built between 2010 and 2016, and Saab 9-4X crossovers built in 2011 and 2012. A loose toe link could cause instability while driving, especially at highway speeds. This recall follows up an investigation by the National Highway Traffic Safety Administration after it received complaints from SRX drivers of uncontrolled swaying while driving. According to the agency, two incidents led to a crash. It's possible that improper procedures for tightening a toe link nut during four-wheel alignments may have resulted in corrosion and thread wear on the adjustable portion of the link. Owners of affected vehicles are advised to park their crossovers if they experience certain Malfunction Indicator Lamp warnings on the dashboard or if they feel unusual steering behavior while driving. According to the official NHTSA recall notice, dealers will replace the adjustable toe link with a non-adjustable one at no charge. Letters are expected to be mailed to owners of affected vehicles on August 9, 2021. Alternatively, owners can call Cadillac customer service at 1-800-458-8006 or Saab customer service at 1-800-955-9007 and reference recall number N212340980. This is the second time many of these vehicles have been recalled for problems with the rear toe links. Back in September of 2014, GM announced that it would recall 290,241 vehicles that included SRX and 9-4X models because a "nut in the rear suspension toe adjuster link may not be torqued to the proper specification." 

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video: