2007 Dts Leveliii Active Cruise Control Heated A/c Seats Navigation on 2040-cars

Auto blog

2020 Cadillac CT5 prototype shows off more lighting details

The elusive 2020 Cadillac CT5 luxury sports sedan has once again been spotted by a spy photographer. This time, we get to see it from all angles, whereas last time we only saw it from the front. It still has quite a bit of fake body work, and it's very clear Cadillac still hopes you'll think this is a Charger, from the big hood scoop to the fake full-width taillights. Digging past those misdirects, we can find some new details about the car. First, the car's front lighting has developed further. There are production-ready headlights fitted that appear to have some sort of LED illumination. These production lights also fit the shape we saw on the last prototype, so they'll end high up on the body, extending slightly horizontally toward the grille. There's still a section that extends back along the fender, seeming to bridge the gap between current Cadillacs and the Escala concept from which this car takes inspiration. Another addition are the vertical LED accent lights. This is another trademark feature of both current Cadillacs and the Escala, but they were absent from the last prototype we saw. We also get a look at some of the grille's details. Instead of slats, this CT5 has a plastic mesh of small rectangles. The pattern is reminiscent of brickwork. These photos also give us our first look at the back of the CT5. It looks like a fairly typical Cadillac. It's much more conservative than the front end. There are some angular cutouts in the bumper to allow exhaust gases out. The taillights have the current Cadillac look with the top curving over the rear fender. We can't tell if there will be a horizontal element like on the Escala, due to the fake lights. We're expecting the CT5 to be shown sometime next year in time for the 2020 model year. Odds are it will use off-the-shelf Cadillac engines including the turbocharged 2.0-liter four-cylinder, naturally aspirated 3.6-liter V6, and the twin-turbo 3.0-liter V6. Now that Cadillac has revealed its twin-turbo 4.2-liter V8, we'll be interested to see if that shows up in a future CT5-V. Related Video: Featured Gallery Cadillac CT5 prototype spy shots View 23 Photos Image Credit: SpiedBilde Spy Photos Cadillac Luxury Sedan cadillac ct5 cadillac escala

GM, Pilot will build EVgo fast chargers at 500 truck stops across U.S.

All of our maps showing electric vehicle charging stations across the U.S. are going to need an update. Today, General Motors, Pilot and EVgo announced plans to work together on a nationwide DC fast charging network. The plan calls for 2,000 charging stalls that can deliver up to 350 kW to be installed at up to 500 Pilot and Flying J travel centers in the U.S. The goal is to have DC fast chargers available in 50-mile intervals across the country. The new charging stations will feature GM's "Ultium Charge 360" branding and "Pilot Flying J" logos but will not be limited to drivers of GM EVs. The plugs will use CCS connectors and be available to anyone. GM EV owners can take advantage of benefits, including the ability to make exclusive reservations, get discounts on charging costs and streamline the charging process with Plug and Charge and in-vehicle apps that can provide real-time charger availability. The first installation phase will take place in 2023, and "the bulk of the installations" should be completed by 2025, EVgo CEO Kathy Zoi said during a conference call with reporters announcing the plan. "We're gonna get going immediately and commence all of that engineering and planning stuff," she said. "We've got a pretty orderly plan." Pilot CEO Shameek Konar said the company expects the new EV charging stations to coexist with the current fuel infrastructure. "An average Pilot Flying J location is about 10 acres," Konar said. "This will be in addition to all of our gas pumps. The way I think about it is, this is a new source of energy that is going to coexist with gas for quite some time. We can debate how long, but we need to serve both groups of customers." Installing DC fast chargers at hundreds of Pilot's travel centers — aka truck stops — means there should be food, drinks, restrooms, WiFi and even showers available while you wait for an EV to charge. Pilot recently announced its “New Horizons” plan that will invest $1 billion in upgrading Pilot travel centers with more premium amenities, including expanded seating and lounge areas. While the exact amount of time it will take to charge an EV using these new stations will vary on the EV and its current state of charge, most EVs can refill from a low state of charge to around 80 percent in 20-30 minutes on a fast charger. The new stations are future-proofed to deliver up to 350 kW, a charge rate that few EVs today can handle.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.