2006 Cadillac Dts Lux 6-passenger Climate Seats 51k Mi Texas Direct Auto on 2040-cars

Auto blog

GM recalls 740,000 vehicles over daytime running light issue

General Motors is recalling over 740,000 vehicles due to a daytime running light issue that causes all of the affected cars to run afoul of Federal Motor Vehicle Safety Standards. Vehicles affected by this recall are spread across many of GM’s brands. Models include the 2020-2023 Cadillac CT4 and CT5, 2021-2023 Buick Envision, 2022-2023 Cadillac Escalade and Escalade ESV, 2022-2023 Chevrolet Silverado 1500, Suburban, Tahoe and 2022-2023 GMC Sierra 1500, Yukon, and Yukon XL. GM says that the daytime running lights may remain on in these cars when the headlights are activated. This is a problem, because FMVSS rules require that the daytime running lights deactivate once the headlights turn on. If the DRLs remain on, GM says that could result in additional glare, thereby increasing the risk of an accident. The cause of this failure to deactivate the DRLs comes from body control module software that “under a combination of certain pre-conditions, could fail to deactivate the DRLs,” according to GM. Other GM vehicles were tested, but due to a difference in software or hardware, they remain unaffected. If this is reminding you of another recent GM recall, youÂ’d be right, as GM recalled another 340,000 vehicles for the same issue last month. After that original issue was found within GM, the company began looking into its other cars to determine if the population was larger than originally thought. GM found the additional vehicles included in todayÂ’s recall have the problem. The fix will either be via an over-the-air update or it will require you to bring the vehicle into a dealer for a software update, depending on which vehicle you have. Owner notification letters letting folks know what is necessary are currently scheduled to go out on January 23, 2023. Related video: Cadillac Escalade Infotainment Review

GM wants to have 10 plug-in models in China in five years

Last we checked, General Motors was selling all of three plug-in vehicle models in its home country of the US, and is prepared to make the Chevrolet Bolt EV available on these shores later this year. So it's notable that the automaker is hatching plans to have at least 10 plug-in variants for sale in China within the next five years, according to Hybrid Cars. Which plug-ins are coming remains a mystery. GM started selling a hybrid version of the Buick LaCrosse in China this month. The strategy makes sense, as China is now the world's largest car market, and accounts for about a third of GM's annual revenue. The automaker, which operates in China under the SAIC-GM and SAIC-GM-Wuling joint ventures, sells cars there under the Chevrolet, Buick, Cadillac, and Boujun badges, and has been doing so for the better part of two decades. Most recently, GM started selling a hybrid version of the Buick LaCrosse in China this month. What we do know is that GM is building its Cadillac CT6 Plug-in Hybrid in China, with distribution to be split between China and the US. That model, which is scheduled to start sales by the end of the year, is being built overseas because of a combination of Chinese government support for new-energy vehicle technology through incentives and the fact that battery-pack maker LG Chem makes most of its cells in nearby South Korea. The plug-ins are part of a broader plan by General Motors to either introduce or substantially tweak about 60 models by the end of the decade. With such new models, GM looks to boost unit sales by as much as five percent a year for the next few years. As for the other nine plug-in models slated for China by 2021, the company is mum. GM spokesman Dan Flores declined to comment to AutoblogGreen. Related Video: Featured Gallery 2016 Cadillac CT6: First Drive View 32 Photos News Source: Hybrid Cars Green Cadillac Chevrolet GM Electric Hybrid PHEV

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.