Cadillac Deville Convertible on 2040-cars

Auto blog

Cadillac's Super Cruise — look, Elon, no hands!

Cadillac is about to start selling vehicles with an autonomous driving mode and TechCrunch got an early look at the technology in a production car. "Wait for the green light and let go," the Cadillac engineer instructed. That's it. The car was driving itself. I, the person behind the steering wheel, was no longer the driver. Cadillac's Super Cruise system was driving. The 2018 Cadillac CT6 sped along U.S. 23 under the direction of Super Cruise. Traffic was light and the weather was perfect. The system held the Cadillac sedan in lane and responded appropriately to traffic. I spent an hour on the expressway and touched the steering wheel and pedals only a few times. Super Cruise made the drive boring. I think that's the point. Here's how it works Super Cruise is available once the driver navigates the vehicle onto an expressway. When ready, a little icon is displayed by the speedometer and the driver hits a button on the steering wheel to switch it on. Once the light bar on top of the steering wheel turns green, the driver can let go. Super Cruise is driving.This steering wheel light bar is key to the operation. When green, the driver knows Super Cruise is in control. Blue means the driver interrupted the system to change lanes and red means Super Cruise needs the driver to confirm they're paying attention and not checking Twitter. When active, Super Cruise controls the steering and speed, but again, only on an expressway. This is done through onboard sensors and using GPS and mapping data. GM employed GeoDigital, a startup in GM Venture's portfolio, to map 160,000 miles of expressways in the U.S. and Canada. The car company then used Super Cruise-equipped vehicles to test each mile. This combination of onboard systems combined with map data makes the system feel polished and sophisticated. During my admittedly limited time in the vehicle, the CT6 precisely held its position in the lane and confidently handled sweeping curves at speed. There was no wiggling or squirming — from the Cadillac or myself. The car was in control, and I felt safe. Although the driving conditions were perfect for my test ride, during adverse weather, the system will work normally until one of the key systems is unable to operate.

Lego's 18.5-inch Ghostbusters Ecto-1 will make you feel like bustin'

If there's something strange in your neighborhood, Lego has something to help you take care of those non-terminal repeating phantasms or class-five full-roaming vapors. This week, it announced a supremely detailed version of the Ecto-1, the iconic 1959 Cadillac Miller-Meteor ambulance from the 1984 film classic, Ghostbusters. The set is comprised of a whopping 2,352 Lego pieces and when completed, will measure 18.5 inches long. It's one of the more accurate Lego vehicles the company has created, and features a steering box connecting the steering wheel to the front wheels, hinged doors and an opening hood with replica V8 engine inside. Like the movie car, it's packed with ghost-fighting gadgetry. There's a rotating ghost-sniffer activated by the wheels, a gunner seat that deploys from one of the rear doors, and a roof rack stacked with loads of spirit-trapping gear. Lego says it's even got some easter eggs that will be discovered as the kit is assembled. Lego says that two automotive pieces were developed specifically for the Ecto-1: a 6x14 curved windscreen and a five-module steering wheel. These should translate well to other vehicles in the future or for custom builds. Notably, this kit was designed by the Michael Psiaki, who created Lego's James Bond Aston Martin DB5 kit. The set is released as a tie-in with the upcoming Ghostbusters: Afterlife movie. It was supposed to be released this summer but was delayed until (as of now) June 2021 as a result of the COVID-19 pandemic. As for the Ecto-1 kit, it will hit shelves Nov. 15 just in time for holiday shopping.

Here's how Cadillac made its Magnetic Ride Control suspension quicker and smarter

Bugatti makes the world's fastest car, but Cadillac claims it has developed the world's fastest suspension. Its fourth-generation Magnetic Ride Control technology receives hardware and software tweaks to deliver a more comfortable ride and sharper handling. It's offered on some variants of the CT4, CT5 and the Escalade. Introduced in 2002 on the Seville STS, this self-adjusting suspension is not as complicated as it might sound. It relies primarily on electromagnets that emit a magnetic field, and a magnetorheological fluid whose viscosity changes depending on the strength of the magnetic force. Sensors scan the road up to 1,000 times per second and send the information they gather to the electromagnets, which then alter their magnetic field as needed to modify the fluid's viscosity. The fluid is in the shocks, so making it thicker returns a firmer ride, and vice versa. In simpler terms, Magnetic Ride Control leverages chemistry and physics to make the ride sporty, comfortable, or somewhere in between -- all in the blink of an eye. By reacting to the changing magnetic field, the fluid-filled shocks filter out road imperfections and maximize tire contact with the road to deliver more precise handling. Cadillac began developing the fourth-generation system by improving the hardware. The in-wheel accelerometers are more accurate than before, the inertial measurement unit is more precise, and the damper fluid formula was changed for quicker response times and a smoother ride. Engineers then turned their attention to the system's software. They notably gave the sensors the ability to process a wider selection of input and output signals, which translates to a wider spread between comfort and sport. And, they made the response time up to 45-percent quicker. All told, the fourth-generation Magnetic Ride Control technology performs better under heavy braking and hard cornering, it delivers more consistent performance, and it reads the road more accurately. Cadillac proudly notes these are the most comprehensive updates it has made to the system in nearly two decades. Magnetic Ride Control comes standard on the 2021 CT4-V and the 2021 CT5-V, and it's bundled into the CT5's V Performance package, which also includes a mechanical limited-slip differential. It's also standard on the Sport and Platinum variants of the 2021 Escalade, and it's part of the Premium Luxury trim's Performance package.